The 2017 Ford Transit Connect is a versatile vehicle designed for both commercial and personal use. Ensuring that the tire pressure is at the correct level is crucial for optimal performance, safety, and fuel efficiency. This vehicle comes in various trims and engine configurations, each with specific tire pressure requirements. Understanding these specifications helps owners maintain their vehicles effectively.
Maintaining proper tire pressure is not just about performance; it also impacts safety. Under-inflated tires can lead to increased wear and tear, decreased fuel efficiency, and a higher risk of blowouts. Conversely, over-inflated tires can cause uneven wear and affect handling. Therefore, it is essential to know the correct tire pressure for your specific 2017 Ford Transit Connect model.
2017 Ford Transit Connect Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| XL | 36 | 2.5 | 36 | 2.5 |
| XLT | 36 | 2.5 | 36 | 2.5 |
| Titanium | 36 | 2.5 | 36 | 2.5 |
| Electric | 38 | 2.6 | 38 | 2.6 |
| All-Wheel Drive | 36 | 2.5 | 36 | 2.5 |
2017 Ford Transit Connect Tire Pressure Sensor Reset
When the tire pressure monitoring system (TPMS) light on your 2017 Ford Transit Connect starts flashing, it indicates a problem with the tire pressure sensors or the tire pressure itself. Resetting the TPMS is essential to ensure accurate monitoring of tire pressure. This process can often be performed by the driver without the need for professional assistance.
Steps to Reset Tire Pressure Sensor
- Check Tire Pressure: Before resetting, ensure all tires are inflated to the recommended pressure.
- Turn on the Ignition: Insert the key and turn it to the “On” position without starting the engine.
- Locate the TPMS Reset Button: This is usually found beneath the steering wheel or in the glove compartment.
- Press and Hold the Reset Button: Hold it until the TPMS light blinks three times, then release it.
- Start the Engine: Turn the ignition to the “Off” position, then start the engine.
- Drive the Vehicle: Drive for about 10 minutes to allow the system to recalibrate.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after following the reset steps, it may indicate a more serious issue. Here are some potential causes:
| Issue | Description |
|---|---|
| Low Tire Pressure | One or more tires may be under-inflated. |
| Faulty Sensor | The TPMS sensor may be malfunctioning or damaged. |
| Dead Battery in Sensor | The battery in one of the tire pressure sensors may need replacement. |
| System Malfunction | There may be an issue with the TPMS itself that requires diagnostic tools. |
What to Do If the Light Remains On
If the TPMS light remains on or continues to flash after the reset, consider the following actions:
- Inspect all tires for visible damage or punctures.
- Check the tire pressure again to ensure accuracy.
- Consult your owner’s manual for specific troubleshooting steps.
- Visit a certified mechanic or tire specialist for a thorough inspection.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the overall performance, safety, and longevity of your 2017 Ford Transit Connect. Incorrect tire pressure can lead to a variety of issues, including poor handling, increased tire wear, and decreased fuel efficiency. Additionally, under-inflated or over-inflated tires can significantly increase the risk of tire blowouts, which can be dangerous while driving.
Proper tire pressure ensures that the tires make optimal contact with the road. This enhances traction, stability, and braking performance. Moreover, maintaining the correct pressure can improve fuel economy, saving you money in the long run. Regularly checking and adjusting tire pressure is a small but vital maintenance task that can have a significant impact on your vehicle’s performance.
How to Check Tire Pressure
Checking the tire pressure of your Ford Transit Connect is straightforward and can be done with a few simple steps:
- Buy a Tire Pressure Gauge: Invest in a good-quality tire pressure gauge, which can be digital or manual.
- Check When Cold: Measure the tire pressure when the tires are cold, ideally before driving or after the vehicle has been parked for a few hours.
- Remove Valve Cap: Unscrew the valve cap from the tire you want to check.
- Press Gauge onto Valve: Firmly press the tire pressure gauge onto the valve stem. Make sure it creates a tight seal to get an accurate reading.
- Read the Pressure: Check the reading on the gauge. Compare it with the recommended tire pressure listed on the driver’s side door jamb or in the owner’s manual.
- Repeat for All Tires: Check the pressure for all four tires, including the spare tire if applicable.
Useful Tips for Maintaining Tire Pressure
To ensure that your tires remain at the optimal pressure, consider the following tips:
- Check Regularly: Make it a habit to check your tire pressure at least once a month and before long trips.
- Monitor Temperature Changes: Tire pressure can fluctuate with temperature changes. Be especially vigilant during seasonal transitions.
- Inspect for Damage: Regularly inspect your tires for any signs of wear, punctures, or damage that could affect pressure.
- Use Nitrogen: Consider filling your tires with nitrogen instead of air. Nitrogen maintains pressure longer and is less affected by temperature changes.
- Rotate Tires: Regularly rotating your tires can help ensure even wear and maintain proper pressure across all tires.
- Stay Informed: Keep an eye on the TPMS light. If it illuminates, check your tire pressure immediately.
By following these guidelines, you can enhance your driving experience, improve safety, and extend the life of your tires.
0 Comments