The 2017 Ford Taurus is a full-size sedan that offers a blend of comfort, style, and performance. One of the key aspects of maintaining the vehicle’s performance and safety is ensuring that the tire pressure is within the manufacturer’s recommended specifications. Proper tire pressure not only enhances fuel efficiency but also improves handling and extends the lifespan of the tires.
Understanding the correct tire pressure for different trims and engine configurations is essential for every Taurus owner. This information can help prevent tire wear and ensure optimal driving conditions. Below is the detailed tire pressure table for the 2017 Ford Taurus.
2017 Ford Taurus Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| SE | 32 | 2.2 | 32 | 2.2 |
| SEL | 32 | 2.2 | 32 | 2.2 |
| Limited | 32 | 2.2 | 32 | 2.2 |
| Sport | 35 | 2.4 | 35 | 2.4 |
2017 Ford Taurus Tire Pressure Sensor Reset
When the Tire Pressure Monitoring System (TPMS) light on your 2017 Ford Taurus flashes, it indicates a potential issue with one or more tires. This could be due to low tire pressure, a malfunctioning sensor, or other related problems. Resetting the tire pressure sensor is a straightforward process, but it’s important to ensure that the tire pressure is correct before proceeding with the reset.
Steps to Reset the Tire Pressure Sensor
- Check the Tire Pressure: Before resetting, use a tire pressure gauge to check the pressure in all four tires. Make sure they are inflated to the recommended PSI as indicated in the tire pressure table.
- Inflate Tires if Necessary: If any tire is below the recommended pressure, inflate it to the correct level.
- Turn the Ignition On: Insert the key into the ignition and turn it to the “On” position without starting the engine.
- Locate the TPMS Reset Button: This button is typically located under the steering wheel or near the driver’s side door. Consult the owner’s manual for the exact location.
- Press and Hold the Reset Button: Hold the button until the TPMS light blinks three times, then release it.
- Start the Engine: Turn off the ignition and then start the engine. The TPMS light should turn off, indicating that the system has been reset.
Troubleshooting the TPMS Light
If the TPMS light continues to flash after resetting, there may be an underlying issue. Here are some common reasons for a persistent TPMS light:
| Issue | Description |
|---|---|
| Faulty Sensor | One or more tire pressure sensors may be malfunctioning and need replacement. |
| Low Battery in Sensor | The battery in the tire pressure sensor may be low or dead, requiring sensor replacement. |
| Improper Installation | If tires were recently changed, the sensors might not have been properly installed or calibrated. |
| Temperature Changes | Significant temperature fluctuations can cause tire pressure to drop, triggering the TPMS light. |
Additional Tips
- Regularly check tire pressure, especially before long trips.
- Keep a tire pressure gauge in your vehicle for convenience.
- Consult a professional mechanic if the TPMS light remains on after resetting.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the overall performance and safety of your vehicle. Under-inflated tires can lead to increased tire wear, reduced fuel efficiency, and compromised handling. Conversely, over-inflated tires can cause a harsh ride and reduce traction, especially in wet conditions. Regularly checking and adjusting your tire pressure can significantly enhance your driving experience and prolong the life of your tires.
Benefits of Proper Tire Pressure
- Improved Fuel Efficiency: Properly inflated tires reduce rolling resistance, which can lead to better gas mileage.
- Enhanced Safety: Correct tire pressure ensures optimal contact with the road, improving handling and reducing the risk of blowouts.
- Extended Tire Life: Maintaining the right pressure helps prevent uneven tire wear, extending the lifespan of your tires.
- Better Vehicle Performance: Proper tire pressure contributes to better acceleration, braking, and cornering capabilities.
How to Check Tire Pressure
Checking tire pressure is a simple process that can be done at home or at a gas station. Here’s how to do it:
- Gather Your Tools: You will need a reliable tire pressure gauge. Digital gauges are often more accurate than manual ones.
- Check Tire Temperature: For the most accurate reading, check tire pressure when the tires are cold (before driving or after sitting for a few hours).
- Remove Valve Cap: Unscrew the valve cap from the tire you want to check.
- Press the Gauge: Firmly press the tire pressure gauge onto the valve stem. Make sure there is no hissing sound, indicating air escaping.
- Read the Pressure: Note the pressure reading on the gauge. Compare it to the recommended tire pressure found in your owner’s manual or on the driver’s side door jamb.
- Replace the Valve Cap: After checking, make sure to screw the valve cap back on securely.
Useful Tips for Maintaining Tire Pressure
- Check Regularly: Inspect your tire pressure at least once a month and before long trips.
- Invest in a Good Gauge: A quality tire pressure gauge can provide more accurate readings than those found at gas stations.
- Monitor Seasonal Changes: Tire pressure can drop in colder temperatures. Adjust accordingly as the seasons change.
- Be Aware of Load Changes: If you frequently carry heavy loads, consider adjusting your tire pressure to accommodate the extra weight.
- Seek Professional Help: If you notice a persistent drop in tire pressure, have a professional check for leaks or damage.
0 Comments