The 2017 Ford Mustang is a popular sports car known for its performance and style. However, one crucial aspect that often gets overlooked is tire pressure. Maintaining the correct tire pressure is essential for optimal handling, fuel efficiency, and overall safety. Understanding the specific tire pressure requirements for different trims and engines can help ensure that your Mustang operates at its best.
Proper tire pressure varies depending on the model and specifications of the vehicle. For the 2017 Ford Mustang, it’s vital to refer to the manufacturer’s recommendations for each trim and engine type. Below is a detailed table outlining the recommended tire pressures in both PSI and BAR for various trims of the 2017 Mustang.
2017 Ford Mustang Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Base V6 | 32 | 2.2 | 32 | 2.2 |
| EcoBoost | 35 | 2.4 | 35 | 2.4 |
| GT | 35 | 2.4 | 36 | 2.5 |
| GT350 | 30 | 2.1 | 30 | 2.1 |
| GT500 | 32 | 2.2 | 32 | 2.2 |
2017 Ford Mustang Tire Pressure Sensor Reset
The tire pressure monitoring system (TPMS) in the 2017 Ford Mustang is designed to alert drivers when tire pressure is too low. However, after inflating the tires to the recommended pressure, the TPMS light may still flash or remain illuminated. Resetting the tire pressure sensor is essential to ensure that the system accurately reflects the current tire conditions.
Steps to Reset the Tire Pressure Sensor
To reset the TPMS light in your 2017 Ford Mustang, follow these steps:
- Check the tire pressure in all four tires using a reliable tire pressure gauge.
- Inflate the tires to the recommended pressure as indicated in the tire pressure table.
- Turn the ignition key to the “On” position without starting the engine.
- Locate the TPMS reset button, usually found beneath the steering wheel or on the dashboard.
- Press and hold the TPMS reset button until the TPMS light blinks three times, then release it.
- Start the engine and drive the vehicle for about 10 minutes at speeds above 50 mph to complete the reset process.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after attempting to reset it, it may indicate a malfunction in the system. Here are some common reasons for a flashing TPMS light:
| Issue | Description |
|---|---|
| Low Tire Pressure | One or more tires may still be under-inflated. |
| Faulty Sensor | A tire pressure sensor may be damaged or malfunctioning. |
| Battery Issue | The battery in one of the tire pressure sensors may be dead. |
| System Malfunction | The TPMS may have a fault that requires professional diagnosis. |
What to Do If the Light Remains On
If the TPMS light remains illuminated or continues to flash after following the reset steps, consider these actions:
- Recheck the tire pressures to ensure they are at the recommended levels.
- Inspect each tire for visible damage or punctures.
- Consult a professional mechanic or tire specialist for further diagnostics.
- Consider having the TPMS sensors replaced if they are found to be faulty.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the performance, safety, and longevity of your 2017 Ford Mustang. Under-inflated or over-inflated tires can lead to a range of issues that affect driving dynamics, fuel efficiency, and tire wear. Here’s why keeping an eye on tire pressure is essential:
Safety
Proper tire pressure ensures optimal contact between the tires and the road, which improves handling and reduces the risk of blowouts. Under-inflated tires can overheat and fail, while over-inflated tires may result in a loss of traction, especially in wet conditions.
Fuel Efficiency
Tires that are not inflated to the recommended levels can increase rolling resistance, leading to higher fuel consumption. Maintaining the correct tire pressure can help improve your Mustang’s fuel efficiency, saving you money at the pump.
Tire Longevity
Correct tire pressure contributes to even tire wear. Under-inflation can cause excessive wear on the outer edges of the tire, while over-inflation can lead to wear in the center. Keeping tires properly inflated extends their lifespan, saving you the expense of premature replacements.
How to Check Tire Pressure
Checking the tire pressure of your Mustang is a straightforward process that can be done at home or at a service station. Follow these steps for accurate measurements:
- Purchase a reliable tire pressure gauge if you don’t already have one.
- Ensure tires are cold for an accurate reading, ideally checking them before driving or after the car has been parked for a few hours.
- Remove the valve cap from the tire you want to check.
- Press the tire pressure gauge onto the valve stem quickly and firmly to get a reading.
- Note the pressure displayed on the gauge and compare it to the recommended pressure listed in your owner’s manual or on the driver’s side door jamb.
- Replace the valve cap securely after checking.
Useful Tips for Tire Pressure Maintenance
To ensure your tires are always at the correct pressure, consider the following tips:
- Check tire pressure at least once a month and before long trips.
- Inspect tires for visible damage or wear regularly.
- Know the recommended tire pressures for your specific Mustang trim and keep a record.
- Invest in a digital tire pressure gauge for more precise readings.
- Consider using a tire inflator that has an automatic shut-off feature to prevent over-inflation.
- Be mindful of temperature changes, as tire pressure can decrease in colder weather.
By prioritizing tire pressure maintenance, you can enhance the performance and safety of your 2017 Ford Mustang, while also extending the life of your tires.
0 Comments