The 2017 Ford Fusion is a midsize sedan known for its sleek design, comfortable ride, and efficient performance. One of the critical aspects of maintaining this vehicle’s performance is ensuring the tires are inflated to the correct pressure. Proper tire pressure not only enhances fuel efficiency but also contributes to overall safety and tire longevity.
Understanding the specific tire pressure requirements for different trims and engines of the 2017 Ford Fusion is essential for optimal performance. Below is a detailed table outlining the recommended tire pressures for various configurations of the vehicle.
2017 Ford Fusion Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| S Hybrid | 35 | 2.41 | 35 | 2.41 |
| S | 35 | 2.41 | 35 | 2.41 |
| SE | 35 | 2.41 | 35 | 2.41 |
| Titanium | 35 | 2.41 | 35 | 2.41 |
| Platinum | 35 | 2.41 | 35 | 2.41 |
| Sport | 32 | 2.21 | 32 | 2.21 |
2017 Ford Fusion Tire Pressure Sensor Reset
The tire pressure monitoring system (TPMS) in the 2017 Ford Fusion plays a crucial role in ensuring that your tires are properly inflated. When the tire pressure sensor detects a discrepancy in tire pressure, it triggers a warning light on the dashboard. If this light is flashing, it may indicate a need to reset the system after correcting the tire pressure.
Resetting the tire pressure sensor is a straightforward process. Follow the steps outlined below to ensure your TPMS is functioning correctly.
Steps to Reset Tire Pressure Sensor
- Check and Adjust Tire Pressure:
- Use a tire pressure gauge to measure the current pressure in each tire.
- Inflate or deflate the tires to the recommended pressure as indicated in the previous section.
- Turn the Ignition On:
- Without starting the engine, turn the ignition key to the “On” position.
- Locate the TPMS Reset Button:
- This button is usually found below the steering wheel or on the dashboard.
- Press and Hold the Reset Button:
- Press and hold the button until the TPMS indicator light flashes three times.
- Start the Engine:
- Turn the ignition off and start the engine to complete the reset process.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after resetting, it may indicate a malfunction in the system. Here are some common causes and solutions:
| Issue | Possible Cause | Recommended Action |
|---|---|---|
| Flashing Light | Low Tire Pressure | Check and inflate tires to the recommended pressure. |
| Flashing Light | Faulty Sensor | Inspect and replace the tire pressure sensor if necessary. |
| Flashing Light | System Malfunction | Consult a professional mechanic for diagnostic testing. |
Maintaining the TPMS is essential for safe driving. Regularly check your tire pressures and address any warning lights promptly to ensure your 2017 Ford Fusion operates efficiently.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is critical for the overall performance and safety of your vehicle. Under-inflated or over-inflated tires can lead to a variety of issues, including decreased fuel efficiency, uneven tire wear, and compromised handling. Furthermore, incorrect tire pressure can significantly increase the risk of tire blowouts, especially at high speeds.
Proper tire pressure ensures that the tires make optimal contact with the road, enhancing traction and stability. This is particularly vital during adverse weather conditions. In addition, maintaining the correct tire pressure can extend the lifespan of your tires, saving you money on replacements in the long run.
How to Check Tire Pressure
Checking tire pressure is a simple task that can be done at home or at a gas station. Here’s how to do it:
- Gather Your Tools:
- Tire pressure gauge (digital or manual)
- Air compressor (if needed)
- Check When Tires Are Cold:
- For the most accurate reading, check tire pressure when the tires are cold, ideally before driving.
- Remove Valve Cap:
- Unscrew the valve cap from the tire you wish to check.
- Press Gauge onto Valve Stem:
- Firmly press the tire pressure gauge onto the valve stem to get a reading.
- Read the Pressure:
- Note the pressure displayed on the gauge and compare it to the recommended PSI for your vehicle.
- Inflate or Deflate as Necessary:
- If the pressure is too low, use an air compressor to inflate the tire.
- If it’s too high, press the valve stem to release some air.
- Replace Valve Cap:
- Once the desired pressure is achieved, screw the valve cap back on securely.
Useful Tips for Tire Pressure Maintenance
To ensure your tires remain in optimal condition, consider the following tips:
- Check Tire Pressure Regularly:
- Make it a habit to check tire pressure at least once a month and before long trips.
- Monitor Temperature Changes:
- Tire pressure can fluctuate with temperature changes. For every 10°F drop in temperature, tire pressure can decrease by about 1 PSI.
- Keep a Spare Tire:
- Ensure that your spare tire is also properly inflated and in good condition.
- Pay Attention to Warning Lights:
- If the TPMS light activates, check your tire pressures immediately.
- Consult the Owner’s Manual:
- Refer to your vehicle’s owner’s manual for the specific tire pressure recommendations and guidelines.
By keeping your tires properly inflated, you enhance your vehicle’s performance, safety, and longevity. Regular checks and maintenance can lead to more efficient driving and reduced costs in the long run.
0 Comments