The 2017 Ford Explorer is a versatile SUV designed for both comfort and performance. One of the critical aspects of maintaining this vehicle is ensuring that the tire pressure is within the manufacturer’s recommended specifications. Proper tire pressure not only enhances fuel efficiency but also contributes to the overall safety and handling of the vehicle.
Maintaining the correct tire pressure is essential for optimal vehicle performance. Each trim and engine variant of the 2017 Ford Explorer may have different tire pressure requirements. Understanding these specifications can help drivers ensure their tires are adequately inflated, leading to better handling, extended tire life, and improved fuel economy.
2017 Ford Explorer Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| XLT 2.3L EcoBoost | 35 | 2.41 | 35 | 2.41 |
| XLT 3.5L V6 | 35 | 2.41 | 35 | 2.41 |
| Limited 3.5L V6 | 35 | 2.41 | 35 | 2.41 |
| Sport 3.5L V6 | 35 | 2.41 | 35 | 2.41 |
| Platinum 3.5L V6 | 35 | 2.41 | 35 | 2.41 |
2017 Ford Explorer Tire Pressure Sensor Reset
The tire pressure monitoring system (TPMS) in the 2017 Ford Explorer is designed to alert drivers when tire pressure is too low or when there is a malfunction in the system. If the TPMS light is flashing, it indicates a problem that requires attention. Resetting the tire pressure sensor is a straightforward process that can help clear the warning light and ensure your vehicle is operating safely.
Steps to Reset the Tire Pressure Sensor
- Ensure all tires are properly inflated according to the specifications in the tire pressure table.
- Turn the ignition to the “On” position without starting the engine.
- Locate the TPMS reset button, usually found beneath the steering wheel or in the glove compartment.
- Press and hold the TPMS reset button until the TPMS light blinks three times, then release the button.
- Start the engine and wait a few minutes for the system to recalibrate.
- Check that the TPMS light has turned off. If it remains on or continues to flash, further diagnostics may be required.
Tire Pressure Monitoring System Light Issues
If the TPMS light continues to flash after resetting, it may indicate other issues. Below is a table highlighting common causes and their solutions.
| Issue | Description | Solution |
|---|---|---|
| Low Tire Pressure | One or more tires are under-inflated. | Check and inflate tires to the recommended PSI. |
| Faulty Sensor | A tire pressure sensor may be malfunctioning. | Inspect and replace the faulty sensor. |
| Battery Issue | The battery in a tire pressure sensor may be dead. | Replace the sensor battery or the entire sensor. |
| System Malfunction | There may be an issue with the TPMS itself. | Consult a professional for diagnostics and repairs. |
Regular Maintenance Tips
To avoid issues with the tire pressure monitoring system, consider the following maintenance tips:
- Regularly inspect tire pressure, especially before long trips.
- Check for visible damage or wear on tires.
- Rotate tires as recommended to ensure even wear.
- Replace tire pressure sensors as needed, typically every 5-7 years.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the overall performance, safety, and efficiency of your vehicle. Under-inflated tires can lead to a host of problems, including decreased fuel efficiency, poor handling, and increased tire wear. Conversely, over-inflated tires can result in a harsher ride and a higher risk of tire blowouts. Properly inflated tires ensure optimal contact with the road, enhancing traction and braking performance.
Benefits of Proper Tire Pressure
- Improved Fuel Efficiency: Correct tire pressure reduces rolling resistance, leading to better fuel economy.
- Enhanced Safety: Properly inflated tires improve vehicle handling, reducing the risk of accidents.
- Extended Tire Life: Maintaining the right pressure helps prevent uneven wear, prolonging tire lifespan.
- Better Ride Quality: Proper inflation provides a smoother ride and better overall comfort.
How to Check Tire Pressure
Checking your tire pressure is a simple task that can be done at home or at a gas station. Follow these steps to ensure your tires are properly inflated:
- Gather Your Tools: You will need a reliable tire pressure gauge, which can be digital or manual.
- Check When Cold: Measure tire pressure when the tires are cold, ideally before driving or after the vehicle has been parked for a few hours.
- Remove Valve Cap: Unscrew the valve cap from the tire you wish to check.
- Press Gauge: Press the tire pressure gauge onto the valve stem firmly to get a reading.
- Read the Pressure: Note the PSI reading displayed on the gauge.
- Compare to Recommendations: Check the reading against the recommended tire pressure specifications found in the owner’s manual or on the driver’s side door jamb.
- Adjust if Necessary: If the pressure is too low, inflate the tire to the recommended PSI. If it’s too high, release some air until it reaches the correct level.
- Replace Valve Cap: Once done, replace the valve cap securely.
Useful Tips for Tire Maintenance
To keep your tires in optimal condition, consider the following tips:
- Check tire pressure at least once a month and before long trips.
- Inspect tires for signs of wear, such as cracks, bulges, or uneven tread wear.
- Rotate your tires regularly, following the manufacturer’s recommendations.
- Ensure your spare tire is also properly inflated and in good condition.
- Be mindful of temperature changes, as tire pressure can drop in colder weather.
By consistently monitoring and maintaining proper tire pressure, you can enhance your vehicle’s performance, ensure safety, and extend the life of your tires.
0 Comments