The 2017 Ford Expedition is a full-size SUV known for its spacious interior, robust performance, and advanced technology features. One of the key aspects of maintaining the vehicle’s performance and safety is ensuring that the tire pressure is within the manufacturer’s recommended range. Proper tire pressure not only enhances fuel efficiency but also contributes to better handling and longer tire life.
Understanding the correct tire pressure for your specific trim and engine type is essential. This information can help you avoid potential issues related to under-inflation or over-inflation. Below is a detailed table that outlines the recommended tire pressure for various trims and engine configurations of the 2017 Ford Expedition.
2017 Ford Expedition Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Expedition XLT 3.5L EcoBoost V6 | 35 | 2.41 | 35 | 2.41 |
| Expedition Limited 3.5L EcoBoost V6 | 35 | 2.41 | 35 | 2.41 |
| Expedition Platinum 3.5L EcoBoost V6 | 35 | 2.41 | 35 | 2.41 |
| Expedition XL 3.5L EcoBoost V6 | 35 | 2.41 | 35 | 2.41 |
2017 Ford Expedition Tire Pressure Sensor Reset
When the tire pressure monitoring system (TPMS) light illuminates or flashes on your 2017 Ford Expedition, it indicates a potential issue with tire pressure or the TPMS itself. Resetting the tire pressure sensor can often resolve the issue, allowing you to drive safely and confidently. Here’s how to reset the tire pressure sensor effectively.
Steps to Reset Tire Pressure Sensor
- Ensure all tires are inflated to the recommended PSI (check the table from the previous section).
- Turn the ignition to the “ON” position without starting the engine.
- Locate the TPMS reset button, usually found beneath the steering wheel or on the dashboard.
- Press and hold the TPMS reset button until the TPMS light blinks three times, then release it.
- Start the engine and wait for a few minutes. The TPMS light should turn off if the reset was successful.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash, it may indicate a malfunction in the system. Here are some potential causes and solutions:
| Issue | Description | Recommended Action |
|---|---|---|
| Low Tire Pressure | Tires may be under-inflated. | Check and inflate tires to the recommended PSI. |
| Faulty Sensor | One or more sensors may be malfunctioning. | Inspect and replace faulty sensors as needed. |
| Battery Issues | TPMS sensor batteries may be dead. | Replace the batteries in the TPMS sensors. |
| System Malfunction | General malfunction in the TPMS. | Consult a professional mechanic for diagnostics. |
Additional Tips
- Regularly check tire pressure, especially before long trips.
- Consider using a tire pressure gauge to ensure accuracy.
- Keep track of tire age and condition; replace tires as necessary.
- Refer to the vehicle’s owner manual for specific TPMS information.
Importance of Maintaining Proper Tire Pressure
Maintaining the correct tire pressure is crucial for the overall performance and safety of your vehicle. Properly inflated tires provide better traction, improved handling, and enhanced fuel efficiency. Under-inflated tires can lead to increased rolling resistance, which negatively impacts fuel economy and can cause excessive tire wear. Conversely, over-inflated tires may result in a harsher ride and reduced contact with the road, affecting stability and braking.
In addition to performance benefits, proper tire pressure is vital for safety. Tires that are not inflated correctly can lead to blowouts or loss of control, especially during high-speed driving or adverse weather conditions. Regularly checking and maintaining tire pressure can prevent accidents and ensure a smooth driving experience.
How to Check Tire Pressure
Checking the tire pressure is a straightforward process. Here’s how to do it:
- Purchase a reliable tire pressure gauge if you don’t already have one.
- Ensure the tires are cold, as pressure readings can vary when tires are warm from driving.
- Remove the valve cap from the tire you want to check.
- Press the tire pressure gauge onto the valve stem firmly to get a reading.
- Note the pressure reading displayed on the gauge.
- Compare the reading to the recommended tire pressure found in the owner’s manual or the driver’s side door jamb.
- If necessary, inflate or deflate the tire to reach the recommended pressure.
Useful Tips for Tire Pressure Maintenance
To ensure optimal tire pressure and longevity, consider the following tips:
- Check tire pressure at least once a month and before long trips.
- Keep a tire pressure gauge in your vehicle for convenience.
- Be aware of temperature changes; tire pressure can decrease in colder weather.
- Inspect tires for visible signs of damage or wear, such as cracks or bulges.
- Rotate your tires regularly to promote even wear.
- Consider investing in a TPMS if your vehicle does not have one; it can alert you to low pressure in real-time.
- Always replace valve caps after checking or inflating tires to prevent dirt and moisture from entering the valve stem.
By adhering to these practices, you can enhance the performance, safety, and lifespan of your tires, ensuring a more enjoyable driving experience with your 2017 Ford Expedition.
0 Comments