The 2017 Ford Escape Titanium is a compact SUV that combines style, performance, and practicality. One of the key aspects of maintaining this vehicle is ensuring that the tire pressure is within the recommended range. Proper tire pressure not only enhances fuel efficiency but also ensures optimal handling and safety on the road.
Understanding the specific tire pressure requirements for different trims and engines of the 2017 Ford Escape Titanium is crucial for every owner. This information helps in making informed decisions about tire maintenance and can prevent potential issues related to under-inflation or over-inflation.
2017 Ford Escape Titanium Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| 2.5L I4 | 35 | 2.41 | 35 | 2.41 |
| 1.5L EcoBoost I4 | 35 | 2.41 | 35 | 2.41 |
| 2.0L EcoBoost I4 | 35 | 2.41 | 35 | 2.41 |
Resetting the Tire Pressure Sensor on the 2017 Ford Escape Titanium
When the tire pressure monitoring system (TPMS) light flashes on your 2017 Ford Escape Titanium, it indicates a problem with the tire pressure sensors. This can occur due to low tire pressure, a malfunctioning sensor, or after adjusting tire pressures. Resetting the TPMS is essential to ensure accurate readings and maintain vehicle safety.
Steps to Reset the Tire Pressure Sensor
- Check Tire Pressure: Ensure all tires are inflated to the recommended PSI as listed in the owner’s manual or on the driver’s side door jamb.
- Turn the Ignition On: Insert the key and turn the ignition to the “On” position without starting the engine.
- Locate the TPMS Reset Button: This button is typically located beneath the steering wheel or near the fuse box.
- Press and Hold the Reset Button: Hold the button until the TPMS light blinks three times and then turns off.
- Start the Engine: Turn the ignition off and then start the engine. The TPMS light should remain off if the reset was successful.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after resetting, it may indicate a more serious issue. Here are potential causes:
- Faulty Tire Pressure Sensor: One or more sensors may be malfunctioning.
- Low Tire Pressure: Double-check that all tires are properly inflated.
- Battery Issues: The sensor batteries may need replacement.
- System Malfunction: There could be an issue with the vehicle’s TPMS itself.
TPMS Troubleshooting Table
| Issue | Possible Cause | Recommended Action |
|---|---|---|
| TPMS Light Flashing | Low Tire Pressure | Check and inflate tires to recommended pressure. |
| TPMS Light On | Faulty Sensor | Inspect sensors; replace if necessary. |
| TPMS Light Blinking | Battery Issues | Replace sensor batteries. |
| TPMS Light Stays On | System Malfunction | Consult a professional for diagnostic testing. |
The Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the overall performance and safety of your vehicle. For the 2017 Ford Escape Titanium, correct tire pressure contributes to better fuel efficiency, improved handling, and a smoother ride. Under-inflated tires can lead to excessive wear, reduced traction, and increased risk of tire blowouts. Conversely, over-inflated tires can cause a harsh ride and uneven tire wear.
Regularly checking and maintaining tire pressure not only enhances safety but also extends the lifespan of your tires. It’s an essential part of vehicle maintenance that should not be overlooked.
How to Check Tire Pressure
Checking the tire pressure on your Ford Escape Titanium is a straightforward process. Follow these steps for accurate results:
- Gather Tools: You will need a reliable tire pressure gauge. Digital gauges tend to be more accurate than manual ones.
- Check When Cold: Measure tire pressure when the tires are cold, ideally before driving or after the vehicle has been parked for at least three hours.
- Remove Valve Cap: Unscrew the valve cap from the tire you wish to check.
- Press Gauge: Firmly press the tire pressure gauge onto the valve stem to get a reading. Ensure there’s no hissing sound, which indicates air loss.
- Read Pressure: Note the pressure reading on the gauge. Compare it to the recommended PSI found in the owner’s manual or on the door jamb.
- Replace Valve Cap: After checking, ensure to replace the valve cap securely.
Useful Tips for Maintaining Proper Tire Pressure
Here are some practical tips to help you maintain proper tire pressure for your Ford Escape Titanium:
- Check Regularly: Make it a habit to check tire pressure at least once a month and before long trips.
- Monitor Temperature Changes: Tire pressure can fluctuate with temperature changes. For every 10°F change, tire pressure can vary by about 1 PSI.
- Use a Quality Gauge: Invest in a good quality tire pressure gauge for accurate readings.
- Don’t Forget the Spare: Check the pressure of your spare tire as well, especially if you need to rely on it in an emergency.
- Be Aware of Load: If you are carrying heavy loads, adjust tire pressure according to the manufacturer’s recommendations for load capacity.
- Seek Professional Help: If you notice consistent pressure loss, have your tires inspected by a professional for leaks or damage.
By following these guidelines, you can ensure that your 2017 Ford Escape Titanium operates safely and efficiently, ultimately enhancing your driving experience.
0 Comments