The 2017 Dodge Charger is a powerful and stylish sedan that combines performance with comfort. A crucial aspect of maintaining this vehicle’s performance is ensuring that the tire pressure is at the recommended levels. Proper tire pressure not only enhances the driving experience but also contributes to safety, fuel efficiency, and tire longevity.
Understanding the specific tire pressure requirements for different trims and engines of the 2017 Dodge Charger is essential for optimal performance. Below is a detailed table outlining the recommended tire pressures for various configurations of this vehicle.
2017 Dodge Charger Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Charger SE | 32 | 2.21 | 32 | 2.21 |
| Charger SXT | 32 | 2.21 | 32 | 2.21 |
| Charger R/T | 36 | 2.48 | 36 | 2.48 |
| Charger Scat Pack | 36 | 2.48 | 36 | 2.48 |
| Charger SRT 392 | 36 | 2.48 | 36 | 2.48 |
| Charger Hellcat | 30 | 2.07 | 30 | 2.07 |
2017 Dodge Charger Tire Pressure Sensor Reset
The tire pressure monitoring system (TPMS) in the 2017 Dodge Charger plays a vital role in ensuring safe driving by alerting the driver when tire pressure is too low. However, there are instances when the TPMS light may start flashing or remain illuminated even after correcting the tire pressure. This indicates that the system needs to be reset. Here’s how to reset the tire pressure sensor in your Charger effectively.
Steps to Reset the Tire Pressure Sensor
- Check and Adjust Tire Pressure:
- Ensure all tires are inflated to the recommended pressure as per the tire pressure table.
- Use a reliable tire pressure gauge for accuracy.
- Turn on the Ignition:
- Insert the key into the ignition or press the start button (without starting the engine).
- Locate the TPMS Reset Button:
- This button is typically found beneath the steering wheel or on the dashboard.
- Press and Hold the TPMS Reset Button:
- Hold the button until the TPMS light blinks three times, then release it.
- Start the Engine:
- Start the vehicle and let it run for about 20 minutes to allow the system to recalibrate.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after following the reset procedure, further troubleshooting may be required. Below is a table outlining potential causes and solutions.
| Issue | Description | Solution |
|---|---|---|
| Low Tire Pressure | One or more tires may be under-inflated. | Check tire pressure and inflate to the recommended levels. |
| Faulty TPMS Sensor | A sensor may be malfunctioning. | Inspect and replace the faulty sensor if necessary. |
| TPMS System Malfunction | The entire TPMS may have a fault. | Consult a professional mechanic to diagnose and repair. |
| Temperature Changes | Significant temperature fluctuations can affect tire pressure. | Recheck tire pressure after temperature changes. |
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for several reasons, impacting both vehicle performance and safety. Under-inflated or over-inflated tires can lead to various issues, including reduced fuel efficiency, uneven tire wear, and compromised handling. Here are some key reasons why proper tire pressure should not be overlooked:
Benefits of Proper Tire Pressure
- Enhanced Fuel Efficiency: Correct tire pressure reduces rolling resistance, leading to better fuel economy.
- Improved Safety: Properly inflated tires ensure better traction and handling, reducing the risk of accidents.
- Longer Tire Life: Maintaining the recommended tire pressure can extend the lifespan of your tires, saving you money on replacements.
- Better Ride Comfort: Correct tire pressure contributes to a smoother ride by absorbing road imperfections effectively.
How to Check Tire Pressure
Checking tire pressure is a straightforward process that should be done regularly, ideally once a month and before long trips. Here’s how to do it:
- Gather Your Tools: You will need a reliable tire pressure gauge. Digital gauges are often more accurate than manual ones.
- Check the Recommended Pressure: Refer to the tire pressure sticker located on the driver’s side door jamb for the recommended PSI.
- Remove Valve Caps: Unscrew the valve caps on each tire, keeping them in a safe place.
- Press the Gauge onto the Valve Stem: Firmly press the gauge onto the valve stem to get a reading. Make sure there’s no hissing sound, which indicates air is escaping.
- Read the Pressure: Note the PSI reading on the gauge. Compare it with the recommended pressure.
- Add or Release Air: If the pressure is too low, add air until it reaches the recommended level. If it’s too high, release some air.
- Replace Valve Caps: After checking and adjusting the pressure, replace the valve caps securely.
Useful Tips for Tire Maintenance
To ensure optimal tire performance, consider the following tips:
- Regular Inspections: Inspect your tires for signs of wear, damage, or foreign objects regularly.
- Rotate Tires: Rotate your tires every 5,000 to 7,500 miles to promote even wear.
- Check Tread Depth: Use the penny test to check tread depth. Insert a penny into the tread; if you can see Lincoln’s head, it’s time for new tires.
- Monitor Temperature Changes: Tire pressure can drop in colder weather. Check your tires more frequently during temperature changes.
By maintaining proper tire pressure and following these simple steps, you can enhance your driving experience, improve safety, and extend the life of your tires.
0 Comments