The 2017 Chevy Volt is a plug-in hybrid vehicle that combines efficiency with performance. As with any vehicle, maintaining the correct tire pressure is crucial for optimal handling, fuel efficiency, and safety. Proper tire pressure ensures that the tires wear evenly and can significantly impact the overall driving experience.
For the 2017 Chevy Volt, tire pressure specifications vary depending on the trim and engine type. Below is a detailed table that outlines the recommended tire pressure for different configurations of the 2017 Chevy Volt.
2017 Chevy Volt Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Base Model | 35 | 2.41 | 35 | 2.41 |
| LT Model | 35 | 2.41 | 35 | 2.41 |
| Premier Model | 35 | 2.41 | 35 | 2.41 |
2017 Chevy Volt Tire Pressure Sensor Reset
The tire pressure monitoring system (TPMS) in the 2017 Chevy Volt is designed to alert drivers when tire pressure is low or if there’s a malfunction with the system. If the TPMS light is flashing, it may indicate that the tire pressure sensors need to be reset. This process is essential for ensuring that the system accurately reflects the current tire pressures.
Steps to Reset the Tire Pressure Sensor
- Check the Tire Pressure:
- Use a reliable tire pressure gauge.
- Ensure all tires are inflated to the recommended PSI levels as indicated in the owner’s manual.
- Turn the Ignition On:
- Do not start the engine.
- Turn the key to the “On” position.
- Locate the TPMS Reset Button:
- Typically found beneath the steering wheel or on the dashboard.
- Refer to the owner’s manual if needed.
- Press and Hold the Reset Button:
- Hold the button until the TPMS light blinks three times.
- Release the button and wait for a few minutes.
- Turn Off the Ignition:
- Turn the key back to the “Off” position.
- Wait for a few seconds before starting the engine.
Understanding the TPMS Light
The TPMS light may flash for several reasons. Here’s a breakdown of common causes:
| TPMS Light Condition | Possible Cause |
|---|---|
| Flashing Light | Low tire pressure or malfunction in the TPMS. |
| Solid Light | Indicates a tire is significantly under-inflated. |
| No Light | All tire pressures are normal, and the system is functioning correctly. |
If the TPMS light continues to flash after resetting, it may indicate a deeper issue with the sensors or the system itself. In such cases, it’s advisable to consult a professional mechanic for diagnosis and repair.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the overall performance and safety of your vehicle. Under-inflated or over-inflated tires can lead to various issues, including decreased fuel efficiency, poor handling, and increased tire wear. Additionally, improper tire pressure can compromise safety, increasing the risk of blowouts and accidents.
Benefits of Proper Tire Pressure
- Improved Fuel Efficiency: Correct tire pressure reduces rolling resistance, allowing the vehicle to use fuel more efficiently.
- Enhanced Safety: Properly inflated tires provide better traction and handling, which is essential for safe driving.
- Longer Tire Life: Maintaining the right pressure helps ensure even tire wear, extending the lifespan of your tires.
- Better Performance: Proper inflation enhances vehicle responsiveness and stability, making for a more enjoyable driving experience.
How to Check Tire Pressure
Checking tire pressure is a simple yet vital task. Follow these steps to ensure your tires are properly inflated:
- Gather Necessary Tools: You will need a reliable tire pressure gauge, which can be digital or manual.
- Check When Tires are Cold: For the most accurate reading, check tire pressure when the tires are cold, ideally before driving or after the vehicle has been parked for at least three hours.
- Remove Valve Caps: Unscrew the valve caps from each tire. Keep them in a safe place to avoid losing them.
- Press the Gauge onto the Valve Stem: Firmly press the tire pressure gauge onto the valve stem. You should hear a brief hiss of air, which is normal.
- Read the Pressure: Check the reading on the gauge. Compare it with the recommended tire pressure found in the owner’s manual or on the driver’s side door jamb.
- Adjust as Necessary: If the pressure is too low, inflate the tire to the recommended level. If it’s too high, release some air until you reach the correct pressure.
- Replace Valve Caps: Once finished, replace the valve caps securely to prevent dirt and moisture from entering the valve.
Useful Tips for Maintaining Tire Pressure
- Regular Checks: Check tire pressure at least once a month and before long trips.
- Monitor Temperature Changes: Tire pressure can fluctuate with temperature changes; expect lower pressure in colder weather.
- Use a Reliable Gauge: Invest in a quality tire pressure gauge for accurate readings.
- Inspect Tires for Damage: Regularly inspect tires for punctures, cracks, or bulges, which can affect pressure.
- Visit a Professional: If you notice persistent pressure issues, consult a mechanic to check for leaks or sensor problems.
0 Comments