The 2017 Chevy Traverse is a versatile SUV that balances performance and comfort. One of the key aspects of maintaining this vehicle’s performance lies in ensuring that the tire pressure is kept at optimal levels. Proper tire pressure not only enhances fuel efficiency but also contributes to safety and the longevity of the tires.
Maintaining the correct tire pressure is essential for a smooth driving experience. Each trim and engine variant of the Traverse may have different specifications for tire pressure, which is crucial for owners to be aware of. Below is a detailed table outlining the recommended tire pressures for various trims and engine configurations of the 2017 Chevy Traverse.
2017 Chevy Traverse Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| LS | 35 | 2.41 | 35 | 2.41 |
| LT | 35 | 2.41 | 35 | 2.41 |
| LTZ | 35 | 2.41 | 35 | 2.41 |
| Premier | 35 | 2.41 | 35 | 2.41 |
2017 Chevy Traverse Tire Pressure Sensor Reset
When the tire pressure monitoring system (TPMS) light on your 2017 Chevy Traverse starts flashing, it indicates an issue with the tire pressure or the sensor itself. This can happen after inflating the tires or if there’s been a significant temperature change. Resetting the tire pressure sensor is crucial to ensure that the system accurately monitors tire pressure.
Steps to Reset Tire Pressure Sensor
Resetting the tire pressure sensor involves a few straightforward steps. Follow this guide to successfully reset the TPMS:
- Check Tire Pressures: Ensure all tires are inflated to the recommended PSI as listed in the owner’s manual or on the door jamb sticker.
- Turn Ignition On: Insert the key into the ignition and turn it to the “On” position without starting the engine.
- Press the TPMS Reset Button: Locate the TPMS reset button, usually found under the steering wheel or in the glove compartment. Press and hold the button until the TPMS light blinks three times.
- Start the Engine: Turn the ignition off and then start the engine. The TPMS light should turn off after a few moments.
- Drive the Vehicle: Take the vehicle for a short drive (around 10 minutes) to allow the system to recalibrate.
Tire Pressure Monitoring System Light Troubleshooting
If the TPMS light continues to flash after following the reset steps, there may be an underlying issue. Here are some common problems to check:
| Issue | Possible Solution |
|---|---|
| Low Tire Pressure | Inflate the tires to the recommended pressure. |
| Faulty Sensor | Inspect and replace the tire pressure sensors if necessary. |
| Temperature Change | Monitor tire pressures as temperature fluctuations can affect readings. |
| Battery Issues | Check the battery of the tire pressure sensors if they are not functioning. |
Important Notes
– Always refer to the owner’s manual for specific instructions related to your vehicle model.
– Regularly check tire pressure to avoid issues with the TPMS.
– If the light persists, consult a professional mechanic for a thorough inspection.
Importance of Maintaining Proper Tire Pressure
Maintaining the correct tire pressure is crucial for the overall performance, safety, and efficiency of your 2017 Chevy Traverse. Proper tire pressure affects handling, fuel economy, and tire longevity. Under-inflated tires can lead to increased rolling resistance, which can decrease fuel efficiency and cause uneven tire wear. Conversely, over-inflated tires can result in a harsher ride and reduced traction, particularly in wet conditions.
Benefits of Proper Tire Pressure
- Enhanced Safety: Properly inflated tires provide better traction and handling, reducing the risk of accidents.
- Improved Fuel Efficiency: Maintaining the correct tire pressure can improve fuel economy by up to 3%, saving you money at the pump.
- Extended Tire Life: Correct tire pressure prevents premature wear and extends the life of your tires, reducing replacement costs.
- Better Ride Comfort: Proper inflation contributes to a smoother ride, enhancing overall driving comfort.
How to Check Tire Pressure
Checking the tire pressure is a simple yet important task. Follow these steps to ensure your tires are properly inflated:
- Gather Tools: You will need a reliable tire pressure gauge and an air compressor if adjustments are necessary.
- Check When Cold: For the most accurate reading, check tire pressure when the tires are cold, ideally before driving or after sitting for a few hours.
- Remove Valve Caps: Unscrew the valve caps from each tire’s valve stem.
- Use the Tire Pressure Gauge: Press the tire pressure gauge onto the valve stem and take the reading. Note the PSI (pounds per square inch).
- Compare to Recommended Pressure: Check the recommended tire pressure for your vehicle, which can be found in the owner’s manual or on the door jamb sticker.
Useful Tips for Maintaining Tire Pressure
-Regular Inspections: Check tire pressure at least once a month and before long trips.
-Monitor Temperature Changes: Be aware that tire pressure can drop in colder weather; adjust accordingly.
-Use a Quality Gauge: Invest in a good tire pressure gauge for accurate readings.
-Watch for Warning Lights: Pay attention to the TPMS light on your dashboard and address any issues promptly.
-Rotate Tires Regularly: Regular tire rotation can help ensure even wear and maintain proper pressure.
By prioritizing proper tire pressure maintenance, you can enhance the performance and safety of your 2017 Chevy Traverse, ensuring a smoother and more economical driving experience.
0 Comments