The 2017 BMW R1200GS is a popular adventure motorcycle known for its versatility and performance. One critical aspect of maintaining this bike is ensuring the tire pressure is at the correct level. Proper tire pressure not only enhances safety but also improves handling, fuel efficiency, and tire longevity.
Understanding the specific tire pressure requirements for different trims and engine configurations is essential for optimal performance. Below is a comprehensive table detailing the recommended tire pressures for the 2017 BMW R1200GS, measured in both PSI and BAR.
2017 BMW R1200GS Tire Pressure
Front Tire Pressure
| Trim/Engine | Pressure (PSI) | Pressure (BAR) |
|---|---|---|
| Standard | 36 | 2.5 |
| Adventure | 36 | 2.5 |
| Sport | 36 | 2.5 |
Rear Tire Pressure
| Trim/Engine | Pressure (PSI) | Pressure (BAR) |
|---|---|---|
| Standard | 42 | 2.9 |
| Adventure | 42 | 2.9 |
| Sport | 42 | 2.9 |
Resetting the Tire Pressure Sensor on the 2017 BMW R1200GS
The tire pressure monitoring system (TPMS) is essential for safe riding. When the TPMS light is flashing, it indicates a problem with the tire pressure sensors. This could mean that the tire pressure is low or that the system needs to be reset. Knowing how to reset the tire pressure sensor is crucial for maintaining optimal performance and safety.
Step-by-Step Guide to Resetting the TPMS
- Ensure all tires are inflated to the recommended pressure.
- Turn the ignition key to the “ON” position without starting the engine.
- Locate the TPMS reset button, typically found near the steering column or under the dashboard.
- Press and hold the reset button until the TPMS light blinks three times, then release it.
- Start the engine and let it run for a few minutes to allow the system to recalibrate.
- Check to see if the TPMS light has turned off.
Troubleshooting a Flashing TPMS Light
If the TPMS light continues to flash after resetting, consider the following:
- Check tire pressures again to ensure they are at the correct levels.
- Inspect for any visible damage or punctures in the tires.
- Examine the TPMS sensors for any signs of malfunction.
- Consult the owner’s manual for specific troubleshooting steps.
- If issues persist, visit a certified BMW service center for further diagnosis.
TPMS Light Status Table
| TPMS Light Status | Meaning |
|---|---|
| Flashing | TPMS malfunction or low tire pressure detected. |
| Solid | One or more tires are under-inflated. |
| Off | All tires are properly inflated and TPMS is functioning correctly. |
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is vital for the performance and safety of the 2017 BMW R1200GS. Incorrect tire pressure can lead to various issues, including poor handling, reduced fuel efficiency, and increased tire wear. Additionally, riding on under-inflated or over-inflated tires can significantly compromise safety, increasing the risk of tire blowouts or loss of traction.
Benefits of Proper Tire Pressure
- Enhanced Safety: Correct tire pressure ensures optimal contact with the road, improving grip and stability.
- Improved Fuel Efficiency: Properly inflated tires reduce rolling resistance, leading to better fuel economy.
- Increased Tire Longevity: Maintaining the right pressure helps prevent uneven tire wear, extending the life of your tires.
- Better Handling: Proper tire pressure contributes to responsive handling, making for a more enjoyable riding experience.
How to Check Tire Pressure
Regularly checking tire pressure is essential for ensuring your motorcycle operates safely and efficiently. Here’s how to do it:
- Purchase a reliable tire pressure gauge, either digital or analog.
- Ensure the tires are cold for an accurate reading; this means checking them before riding or after the bike has been stationary for at least three hours.
- Remove the valve cap from the tire you want to check.
- Press the gauge onto the valve stem firmly to get a reading.
- Note the pressure reading and compare it to the recommended PSI listed in the owner’s manual.
- If the pressure is too low or too high, adjust it accordingly using an air compressor or by releasing air.
- Replace the valve cap securely after checking.
Useful Tips for Maintaining Tire Pressure
- Check Regularly: Inspect tire pressure at least once a month or before long rides.
- Monitor Temperature Changes: Tire pressure can fluctuate with temperature changes, so check more frequently during seasonal transitions.
- Know the Signs: Be aware of signs of improper tire pressure, such as uneven tire wear or a bumpy ride.
- Use a Quality Gauge: Invest in a good quality tire pressure gauge for accurate readings.
- Don’t Forget the Spare: If your bike has a spare tire, ensure it’s also checked and maintained.
By following these guidelines, you can ensure that your 2017 BMW R1200GS operates safely and efficiently, maximizing both performance and longevity.
0 Comments