The 2017 BMW i3 is an innovative electric vehicle that combines efficiency with modern design. Proper tire maintenance is crucial for optimal performance and safety. One of the key aspects of tire maintenance is maintaining the correct tire pressure, which can significantly affect the vehicle’s range, handling, and overall driving experience.
Understanding the specific tire pressure requirements for different trims and engines of the 2017 BMW i3 is essential for owners. This ensures that the vehicle operates as intended and maximizes its electric range. Below is a detailed table outlining the recommended tire pressure for various trims of the 2017 BMW i3.
2017 BMW i3 Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| i3 (Base Model) | 38 | 2.62 | 38 | 2.62 |
| i3 with Range Extender | 38 | 2.62 | 38 | 2.62 |
| i3s (Sport Model) | 36 | 2.48 | 36 | 2.48 |
2017 BMW i3 Tire Pressure Sensor Reset
The tire pressure monitoring system (TPMS) in the 2017 BMW i3 is designed to alert drivers when tire pressure is too low. However, after adjusting tire pressure or changing a tire, it may be necessary to reset the TPMS. Ignoring the warning light can lead to safety issues and reduced efficiency. Below are the steps to reset the tire pressure sensor.
Steps to Reset Tire Pressure Sensor
- Ensure all tires are inflated to the recommended pressure levels.
- Turn on the ignition without starting the engine.
- Locate the TPMS reset button, usually found under the steering wheel or in the glove compartment.
- Press and hold the TPMS reset button until the TPMS light blinks three times, then release the button.
- Start the vehicle and drive for about 10 minutes to allow the system to recalibrate.
Tire Pressure Monitoring System Light Flashing
If the TPMS light is flashing, it indicates a malfunction in the system. This could be due to a faulty sensor or other issues. Here’s what to do:
- Check for any visible damage to the tires.
- Inspect the tire pressure levels; ensure they match the specifications.
- Drive the vehicle for a short distance to see if the light remains on.
- If the light continues to flash, visit a certified BMW technician for diagnostics.
Table of Common TPMS Issues
| Issue | Possible Cause | Recommended Action |
|---|---|---|
| Light Blinking | Faulty sensor | Visit a technician for inspection |
| Light On | Low tire pressure | Check and inflate tires |
| No Light | System malfunction | Reset the system or consult a technician |
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the performance, safety, and longevity of your 2017 BMW i3. Incorrect tire pressure can lead to a range of issues, including reduced fuel efficiency, uneven tire wear, and compromised handling. Additionally, driving on under-inflated tires can increase the risk of blowouts, especially at high speeds.
Properly inflated tires enhance the vehicle’s range, allowing for longer journeys on a single charge. They also provide better traction, improving overall driving stability. Regularly checking and maintaining tire pressure is not just a good practice; it’s essential for maximizing the benefits of your electric vehicle.
How to Check Tire Pressure
Checking the tire pressure is a straightforward process that can be done at home or at a gas station. Follow these steps for accurate results:
- Purchase a reliable tire pressure gauge if you don’t already have one.
- Ensure the tires are cold; check pressure in the morning before driving.
- Remove the valve cap from the tire you want to check.
- Press the tire pressure gauge onto the valve stem firmly to get a reading.
- Note the pressure displayed on the gauge and compare it to the recommended levels found in the owner’s manual or on the driver’s side door jamb.
- Replace the valve cap securely after checking.
Useful Tips for Maintaining Tire Pressure
To ensure your tires remain at the optimal pressure, consider the following tips:
- Check tire pressure at least once a month and before long trips.
- Inspect tires visually for any signs of wear or damage.
- Keep a tire pressure gauge in your vehicle for convenience.
- Be aware that tire pressure can fluctuate with temperature changes; check more frequently during extreme weather conditions.
- Rotate your tires regularly to promote even wear and performance.
- Consider using nitrogen instead of air for inflation, as it maintains pressure better over time.
By adhering to these practices, you can ensure that your 2017 BMW i3 operates efficiently and safely, prolonging the life of your tires and enhancing your driving experience.
0 Comments