The 2017 Acura TLX is a well-engineered luxury sedan that combines performance with comfort. One of the critical aspects of maintaining this vehicle’s performance is ensuring that the tire pressure is at the recommended levels. Proper tire pressure not only enhances fuel efficiency but also improves handling and safety.
Maintaining the correct tire pressure is essential for the longevity of the tires and overall vehicle performance. Each trim of the 2017 Acura TLX has specific tire pressure requirements that should be adhered to for optimal driving experience. Below is the detailed tire pressure table for different trims and engine configurations of the 2017 Acura TLX.
2017 Acura TLX Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| 2.4L I4 | 32 | 2.2 | 32 | 2.2 |
| 3.5L V6 | 33 | 2.3 | 33 | 2.3 |
| 3.5L V6 with AWD | 33 | 2.3 | 33 | 2.3 |
| TLX A-Spec 3.5L V6 | 32 | 2.2 | 32 | 2.2 |
2017 Acura TLX Tire Pressure Sensor Reset
The tire pressure monitoring system (TPMS) in the 2017 Acura TLX is designed to alert drivers when tire pressure is significantly low. However, after inflating the tires to the recommended pressure, it’s essential to reset the TPMS to ensure it accurately reflects the current tire pressure. If the TPMS light is flashing, it indicates a malfunction or that the system needs to be reset.
Here’s how to reset the tire pressure sensor in your 2017 Acura TLX:
Steps to Reset the Tire Pressure Sensor
- Ensure all tires are inflated to the correct pressure as per the specifications in the tire pressure table.
- Turn the ignition to the “ON” position without starting the engine.
- Locate the TPMS reset button, typically found beneath the steering wheel or near the driver’s side door.
- Press and hold the TPMS reset button until the TPMS indicator light blinks three times, then release it.
- Start the engine and let it run for a few minutes. This allows the system to recalibrate.
- Check if the TPMS light turns off. If it remains on or continues to flash, repeat the process or consult a professional.
Tire Pressure Monitoring System Light Flashing
If the TPMS light is flashing, it may indicate a malfunction in the system or that there is an issue with one or more tires. Here’s what you can do:
Possible Causes of a Flashing TPMS Light
| Cause | Description |
|---|---|
| Low Tire Pressure | One or more tires are below the recommended pressure. |
| Faulty TPMS Sensor | The sensor in one of the tires may be malfunctioning. |
| Dead Battery in Sensor | The battery in the tire pressure sensor may need replacement. |
| System Malfunction | The TPMS may have a system error that requires diagnostic tools to resolve. |
What to Do If TPMS Light Remains On
- Check all tires for proper inflation.
- Inspect for any visible damage or punctures.
- Visit a certified technician for a thorough diagnosis.
- Consider having the TPMS sensors checked or replaced if they are faulty.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the overall performance, safety, and longevity of your 2017 Acura TLX. Under-inflated or over-inflated tires can lead to various issues, including reduced fuel efficiency, uneven tire wear, and compromised handling. Moreover, incorrect tire pressure can increase the risk of tire blowouts, which can be dangerous while driving.
Proper tire pressure ensures that your tires maintain optimal contact with the road surface. This contact is vital for effective braking, steering, and overall vehicle stability. Additionally, keeping your tires inflated to the recommended levels can enhance fuel efficiency, saving you money at the pump over time.
How to Check Tire Pressure
Checking tire pressure is a straightforward process that can be done with a tire pressure gauge. Here are the steps to follow:
- Ensure the vehicle has been parked for at least three hours to allow the tires to cool down.
- Remove the valve cap from the tire you want to check.
- Press the tire pressure gauge onto the valve stem until you hear a hissing sound, which indicates air is escaping.
- Read the pressure displayed on the gauge. Compare it to the recommended pressure listed in the owner’s manual or on the driver’s side door jamb.
- Replace the valve cap securely after checking the pressure.
Useful Tips for Maintaining Proper Tire Pressure
To ensure your tires remain at the correct pressure, consider the following tips:
- Check tire pressure at least once a month and before long trips.
- Always check tire pressure when the tires are cold for the most accurate reading.
- Invest in a reliable digital or dial tire pressure gauge for easy and accurate measurements.
- Keep a portable air compressor in your vehicle for on-the-go adjustments.
- Be aware of seasonal changes, as temperature fluctuations can affect tire pressure. For every 10°F change in temperature, tire pressure can change by about 1 PSI.
- Regularly inspect tires for signs of wear, damage, or punctures that could affect pressure.
- Consider rotating your tires every 5,000 to 7,500 miles to promote even wear.
By staying vigilant about tire pressure, you can enhance your driving experience, improve safety, and extend the life of your tires. Regular maintenance is key to keeping your 2017 Acura TLX performing at its best.
0 Comments