The 2016 Subaru Legacy is a midsize sedan known for its reliability, comfort, and all-weather capability. One of the essential aspects of vehicle maintenance is maintaining proper tire pressure. Correct tire pressure ensures optimal performance, safety, and fuel efficiency. Understanding the recommended tire pressure for different trims and engines can help you keep your Legacy in top shape.
Maintaining the correct tire pressure is not just about comfort; it significantly impacts handling, tire wear, and overall vehicle safety. Each trim of the 2016 Subaru Legacy may have different specifications for tire pressure. Below is a detailed table outlining the recommended tire pressures for various trims and engines.
2016 Subaru Legacy Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Legacy 2.5i | 32 | 2.2 | 32 | 2.2 |
| Legacy 2.5i Premium | 32 | 2.2 | 32 | 2.2 |
| Legacy 2.5i Limited | 32 | 2.2 | 32 | 2.2 |
| Legacy 3.6R Limited | 30 | 2.1 | 30 | 2.1 |
| Legacy 2.0T Premium | 32 | 2.2 | 32 | 2.2 |
| Legacy 2.0T Limited | 32 | 2.2 | 32 | 2.2 |
How to Reset Tire Pressure Sensor on 2016 Subaru Legacy
The tire pressure monitoring system (TPMS) is a crucial feature in the 2016 Subaru Legacy. It alerts the driver when tire pressure is low, ensuring safety and optimal performance. However, the TPMS light may sometimes flash or remain on even after correcting tire pressures. Resetting the tire pressure sensor is necessary in such cases. Here’s how to do it effectively.
Steps to Reset the Tire Pressure Sensor
- Ensure all tires are inflated to the recommended pressure.
- Turn on the ignition without starting the engine.
- Locate the TPMS reset button, usually found beneath the steering wheel or on the dashboard.
- Press and hold the TPMS reset button until the TPMS light blinks three times, then release it.
- Start the engine and drive the vehicle for about 10 minutes. This allows the system to recalibrate.
Tire Pressure Monitoring System Light Troubleshooting
If the TPMS light continues to flash or remains illuminated, it may indicate a malfunction. Here are some common issues:
| Issue | Possible Cause | Recommended Action |
|---|---|---|
| Light Blinks | Low Tire Pressure | Check and inflate tires to the recommended PSI. |
| Light Stays On | Faulty Sensor | Inspect sensors and replace if necessary. |
| Light Flashes After Reset | System Malfunction | Consult a professional mechanic for diagnostics. |
Additional Tips for Tire Pressure Monitoring
- Regularly check tire pressure, especially before long trips.
- Inspect tires for damage or wear that could affect pressure readings.
- Consider getting the TPMS checked during routine maintenance.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the overall performance and safety of your 2016 Subaru Legacy. Under-inflated or over-inflated tires can lead to various issues, including reduced fuel efficiency, compromised handling, and increased tire wear. Moreover, improper tire pressure can heighten the risk of tire blowouts, particularly at high speeds. Regularly checking and maintaining the correct tire pressure not only enhances your vehicle’s performance but also extends the lifespan of your tires.
How to Check Tire Pressure
Checking tire pressure is a simple yet essential task that can be done in just a few minutes. Here’s how to do it:
- Gather Tools: You will need a reliable tire pressure gauge. Digital gauges are often more accurate, but analog gauges can work well too.
- Check When Cold: Measure tire pressure when the tires are cold, ideally before driving or after the vehicle has been parked for a few hours.
- Remove Valve Caps: Unscrew the valve caps from each tire’s valve stem.
- Press Gauge onto Valve Stem: Firmly press the gauge onto the valve stem to get a reading. Ensure a good seal to avoid air escaping.
- Read the Pressure: Note the PSI reading on the gauge. Compare it to the recommended tire pressure found in the owner’s manual or on the driver’s side door jamb.
- Repeat: Check the pressure for all four tires, including the spare if applicable.
Useful Tips for Maintaining Tire Pressure
To ensure your tires are always at the correct pressure, consider the following tips:
- Regular Checks: Check tire pressure at least once a month and before long trips.
- Temperature Awareness: Be aware that tire pressure can change with temperature. For every 10°F change in temperature, tire pressure can fluctuate by about 1 PSI.
- Visual Inspections: Regularly inspect your tires for signs of wear, damage, or uneven tread wear, which can indicate improper pressure.
- Use a Quality Gauge: Invest in a good-quality tire pressure gauge for accurate readings.
- Inflate to Recommended PSI: Always inflate tires to the manufacturer’s recommended PSI. Avoid over-inflation, which can lead to a harsh ride and increased risk of tire damage.
- Monitor TPMS: If your Legacy is equipped with a Tire Pressure Monitoring System (TPMS), pay attention to any alerts indicating low tire pressure.
By following these guidelines, you can ensure that your 2016 Subaru Legacy maintains optimal tire pressure, enhancing safety, performance, and fuel efficiency.
0 Comments