The 2016 Ford Taurus is a full-size sedan known for its comfort and performance. Proper tire pressure is vital for ensuring optimal handling, fuel efficiency, and safety. Maintaining the recommended tire pressure not only enhances the driving experience but also prolongs the life of the tires.
Understanding the specific tire pressure requirements for different trims and engine configurations of the 2016 Ford Taurus is essential. Below is a detailed table that outlines the recommended tire pressure settings in both PSI (pounds per square inch) and BAR (barometric pressure) for various models.
2016 Ford Taurus Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| SE | 32 | 2.2 | 32 | 2.2 |
| SEL | 32 | 2.2 | 32 | 2.2 |
| Limited | 35 | 2.4 | 35 | 2.4 |
| Sport | 35 | 2.4 | 35 | 2.4 |
| Police Interceptor | 36 | 2.5 | 36 | 2.5 |
2016 Ford Taurus Tire Pressure Sensor Reset
The tire pressure monitoring system (TPMS) in the 2016 Ford Taurus is designed to alert you when tire pressure is low or when there is a malfunction. If the TPMS light is flashing, it indicates that there is an issue that needs to be addressed. Resetting the tire pressure sensor is a straightforward process that can help ensure your vehicle operates safely and efficiently.
Steps to Reset the Tire Pressure Sensor
- Check Tire Pressure: Before resetting the sensor, ensure all tires are inflated to the recommended pressure. Refer to the tire pressure table for the correct PSI values.
- Turn on the Ignition: Insert the key into the ignition and turn it to the “On” position without starting the engine.
- Locate the TPMS Reset Button: The reset button is typically located beneath the steering wheel or in the glove compartment.
- Press the Reset Button: Press and hold the TPMS reset button until the TPMS light blinks three times, then release it.
- Start the Vehicle: Turn off the ignition, then start the engine to ensure the TPMS light goes off.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after following the reset procedure, there may be an underlying issue. Here are some potential causes:
| Issue | Description |
|---|---|
| Low Tire Pressure | One or more tires may be under-inflated. Check and inflate to the recommended levels. |
| Faulty Sensor | The TPMS sensor in one of the tires may be malfunctioning and needs replacement. |
| Battery Issues | The battery in the TPMS sensor may be dead, requiring a new sensor. |
| Improper Installation | If tires were recently changed or rotated, ensure the sensors were properly installed. |
Additional Tips
- Regularly check tire pressure, especially before long trips.
- Consider having the TPMS checked during routine maintenance.
- Use a reliable tire pressure gauge for accurate readings.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the overall performance and safety of your vehicle. Tires that are inflated to the correct pressure ensure optimal contact with the road, which enhances traction, handling, and braking. Under-inflated tires can lead to increased rolling resistance, reduced fuel efficiency, and premature tire wear. Conversely, over-inflated tires can cause a harsh ride and decrease the tire’s contact patch, leading to reduced grip.
Additionally, driving on improperly inflated tires can pose serious safety risks. It increases the likelihood of tire blowouts and can negatively impact the vehicle’s stability. Regularly checking and maintaining tire pressure can save money on fuel costs and extend the lifespan of your tires, making it a vital aspect of vehicle maintenance.
How to Check Tire Pressure
Checking tire pressure is a simple process that can be done in a few easy steps:
- Gather Your Tools: You will need a reliable tire pressure gauge. Digital gauges are often more accurate, but analog gauges work well too.
- Check the Recommended Pressure: Locate the recommended tire pressure for your 2016 Ford Taurus. This information can usually be found on a sticker inside the driver’s side door jamb or in the owner’s manual.
- Remove Valve Caps: Start with one tire at a time. Remove the valve cap from the tire you want to check.
- Press the Gauge: Firmly press the tire pressure gauge onto the valve stem. You should hear a brief hissing sound as air escapes; this is normal.
- Read the Pressure: Check the reading on the gauge. Compare it to the recommended PSI for your vehicle.
- Adjust as Necessary: If the pressure is too low, inflate the tire to the recommended level. If it’s too high, release some air until it reaches the correct pressure.
- Replace Valve Caps: After checking and adjusting, replace the valve cap securely.
Useful Tips for Maintaining Proper Tire Pressure
- Check Regularly: Inspect tire pressure at least once a month and before long trips.
- Monitor Temperature Changes: Tire pressure can drop in colder weather. Check pressure during seasonal changes.
- Inspect Tires Visually: Look for signs of wear or damage, such as cracks or bulges, which can indicate pressure issues.
- Use a Quality Gauge: Invest in a high-quality tire pressure gauge for accurate readings.
- Don’t Forget the Spare: Check the spare tire’s pressure as well. It’s often overlooked but essential for emergencies.
By prioritizing proper tire pressure maintenance, you enhance your vehicle’s safety, performance, and longevity. Regular checks and adjustments are simple yet effective ways to ensure your 2016 Ford Taurus operates at its best.
0 Comments