The 2016 Ford Focus ST is a performance-oriented hatchback that combines sporty handling with everyday practicality. One crucial aspect of maintaining its performance is ensuring that the tire pressure is within the recommended range. Proper tire inflation not only enhances handling and fuel efficiency but also prolongs tire life and ensures safety on the road.
Understanding the correct tire pressure for the various trims and engines of the 2016 Ford Focus ST is essential for optimal performance. Below is a detailed tire pressure table that outlines the recommended PSI and BAR for different configurations of the vehicle.
2016 Ford Focus ST Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Focus ST (2.0L Turbo) | 35 | 2.41 | 33 | 2.27 |
| Focus ST (2.0L Turbo, Performance Package) | 36 | 2.48 | 34 | 2.34 |
| Focus ST (2.0L Turbo, Winter Package) | 33 | 2.27 | 31 | 2.14 |
2016 Ford Focus ST Tire Pressure Sensor Reset
If the tire pressure monitoring system (TPMS) light on your 2016 Ford Focus ST is flashing, it indicates that there may be an issue with tire pressure or the sensors themselves. Resetting the tire pressure sensor is a straightforward process that can help ensure your vehicle operates safely and efficiently. Here’s how to reset the TPMS light and address any potential issues.
Steps to Reset the Tire Pressure Sensor
- Ensure all tires are inflated to the recommended pressure.
- Turn the ignition to the “On” position without starting the engine.
- Locate the TPMS reset button, usually found beneath the steering wheel or on the dashboard.
- Press and hold the reset button until the TPMS light blinks three times, then release it.
- Start the engine and drive for about 10 minutes to allow the system to recalibrate.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after resetting, it may indicate a malfunction in the system. Here are some common reasons for a flashing TPMS light:
| Issue | Description |
|---|---|
| Low Tire Pressure | One or more tires are under-inflated, requiring immediate attention. |
| Faulty Sensor | A tire pressure sensor may be malfunctioning or damaged. |
| TPMS System Error | The TPMS may require a diagnostic check for electronic issues. |
What to Do If the Light Does Not Turn Off
If the TPMS light remains illuminated after following the reset procedure, consider taking the following actions:
- Check tire pressures manually with a gauge to ensure they match the recommended levels.
- Inspect tires for visible damage or punctures that may affect pressure.
- Visit a qualified technician to diagnose and repair any issues with the TPMS.
Importance of Maintaining Proper Tire Pressure
Maintaining the correct tire pressure is crucial for the overall performance and safety of your 2016 Ford Focus ST. Properly inflated tires ensure optimal contact with the road, which enhances handling, fuel efficiency, and tire longevity. Under-inflated tires can lead to increased rolling resistance, reduced fuel economy, and greater tire wear. Conversely, over-inflated tires can result in a harsher ride and decreased traction, especially in wet conditions.
Benefits of Proper Tire Pressure
- Improved Fuel Efficiency: Correct tire pressure minimizes rolling resistance, allowing your vehicle to consume less fuel.
- Enhanced Safety: Properly inflated tires improve traction and handling, reducing the risk of accidents.
- Longer Tire Life: Maintaining the right pressure can extend the life of your tires, saving you money in the long run.
- Better Ride Comfort: Proper inflation contributes to a smoother ride, enhancing overall driving comfort.
How to Check Tire Pressure
Regularly checking your tire pressure is essential for maintaining optimal performance. Here’s how to do it:
- Gather Your Tools: You will need a reliable tire pressure gauge and an air pump.
- Check When Cold: Measure tire pressure when the tires are cold, ideally before driving or after the vehicle has been parked for a few hours.
- Remove Valve Cap: Take off the valve cap from the tire you want to check.
- Insert Tire Pressure Gauge: Press the gauge onto the valve stem until you hear a hissing sound, then read the pressure on the gauge.
- Compare with Recommended Pressure: Refer to the tire pressure table for your specific trim to ensure the pressure is within the recommended range.
- Adjust as Necessary: If the pressure is too low, add air until it reaches the recommended level. If it’s too high, release some air before replacing the valve cap.
Useful Tips for Tire Maintenance
To keep your tires in optimal condition, consider the following tips:
- Check Monthly: Make it a habit to check your tire pressure at least once a month.
- Inspect for Damage: Regularly inspect your tires for signs of wear, uneven tread, or punctures.
- Rotate Tires: Rotate your tires every 5,000 to 7,500 miles to promote even wear.
- Use Nitrogen: Consider using nitrogen for inflation, as it can help maintain pressure longer than regular air.
By prioritizing tire pressure maintenance, you can enhance the performance and safety of your 2016 Ford Focus ST, ensuring a better driving experience overall.
0 Comments