The 2016 Ford Explorer is a versatile SUV known for its spacious interior and robust performance. Proper maintenance is crucial for ensuring the vehicle operates efficiently and safely. One of the key aspects of vehicle maintenance is monitoring and maintaining the correct tire pressure. Incorrect tire pressure can lead to poor handling, reduced fuel efficiency, and even tire blowouts.
Understanding the recommended tire pressure for different trims and engines of the 2016 Ford Explorer is essential for any owner. Below is a detailed table that outlines the appropriate tire pressure specifications for various configurations of this model.
2016 Ford Explorer Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Base 2WD | 35 | 2.41 | 35 | 2.41 |
| XLT 2WD | 35 | 2.41 | 35 | 2.41 |
| Limited 4WD | 35 | 2.41 | 35 | 2.41 |
| Sport 4WD | 35 | 2.41 | 35 | 2.41 |
| Platinum 4WD | 35 | 2.41 | 35 | 2.41 |
2016 Ford Explorer Tire Pressure Sensor Reset
The tire pressure monitoring system (TPMS) in the 2016 Ford Explorer is designed to alert drivers when tire pressure is low. However, the system may sometimes require a reset, especially after adjusting tire pressure or after a tire change. A flashing TPMS light indicates that there is an issue that needs attention. Here’s how to reset the tire pressure sensor effectively.
Steps to Reset the Tire Pressure Sensor
- Ensure all tires are inflated to the recommended pressure.
- Turn the ignition to the “On” position without starting the engine.
- Locate the TPMS reset button, typically found beneath the steering wheel or in the glove box.
- Press and hold the reset button until the TPMS light blinks three times, then release it.
- Start the engine and allow it to run for a few minutes.
- Drive the vehicle for about 10 minutes at speeds over 50 mph to complete the reset.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after following the reset steps, it may indicate a malfunction in the system. Here are some common reasons for a flashing light:
| Issue | Description |
|---|---|
| Low Tire Pressure | One or more tires may be under-inflated. |
| Faulty Sensor | A tire pressure sensor may be damaged or malfunctioning. |
| Battery Issues | The battery in a tire pressure sensor may be low or dead. |
| System Malfunction | The TPMS may have a fault that requires professional diagnosis. |
What to Do If the Light Doesn’t Reset
If the TPMS light remains illuminated or continues to flash after resetting, follow these steps:
- Recheck tire pressures to ensure they are at the correct levels.
- Inspect each tire for visible damage or leaks.
- Consult the owner’s manual for specific troubleshooting tips.
- Visit a certified Ford service center for a diagnostic check.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the overall safety and performance of your vehicle. Under-inflated or over-inflated tires can lead to a range of issues, including decreased fuel efficiency, poor handling, and increased tire wear. Furthermore, improper tire pressure can significantly affect braking distances and overall vehicle stability, especially in adverse weather conditions.
Regularly checking and maintaining the correct tire pressure can enhance your driving experience and prolong the life of your tires. Here are some key reasons why proper tire pressure is essential:
Benefits of Proper Tire Pressure
- Improved Fuel Efficiency: Correctly inflated tires reduce rolling resistance, leading to better gas mileage.
- Enhanced Safety: Proper tire pressure ensures optimal traction and handling, reducing the risk of accidents.
- Extended Tire Life: Maintaining the right pressure minimizes uneven tire wear, prolonging the lifespan of your tires.
- Better Performance: Properly inflated tires improve ride comfort and vehicle responsiveness.
How to Check Tire Pressure
Checking tire pressure is a straightforward process that can be done at home with a few simple tools. Here’s how to do it:
- Gather your tools: You will need a tire pressure gauge and, optionally, an air compressor.
- Ensure the tires are cold: Check the tire pressure in the morning or after the vehicle has been parked for at least three hours.
- Remove the valve cap from the tire you wish to check.
- Press the tire pressure gauge onto the valve stem firmly to get a reading.
- Note the pressure reading and compare it to the recommended tire pressure found on the driver’s side door jamb or in the owner’s manual.
- If the pressure is too low, add air until it reaches the recommended level. If it’s too high, let some air out.
- Replace the valve cap securely after checking.
Useful Tips for Maintaining Tire Pressure
To ensure your tires remain in optimal condition, consider the following tips:
- Check Regularly: Make it a habit to check tire pressure at least once a month and before long trips.
- Use a Quality Gauge: Invest in a reliable tire pressure gauge for accurate readings.
- Monitor Weather Changes: Tire pressure can fluctuate with temperature changes, so adjust accordingly.
- Inspect for Damage: Regularly check for cuts, punctures, or bulges on your tires.
- Rotate Tires: Follow the recommended tire rotation schedule to promote even wear.
By prioritizing proper tire pressure maintenance, you can enhance your driving safety, improve fuel efficiency, and extend the life of your tires. Regular checks and adjustments will ensure that your 2016 Ford Explorer performs at its best.
0 Comments