The 2016 Ford Expedition is a robust SUV designed for both comfort and performance. One critical aspect of maintaining its performance and safety is ensuring that the tire pressure is set correctly. Proper tire pressure not only enhances fuel efficiency but also contributes to better handling and tire longevity.
Understanding the recommended tire pressure for different trims and engines of the 2016 Ford Expedition is essential for owners. This information helps ensure that each vehicle operates optimally under various conditions. Below is a detailed table outlining the tire pressure specifications for different trims and engines of the 2016 Ford Expedition.
2016 Ford Expedition Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| XL | 35 | 2.41 | 35 | 2.41 |
| XLT | 35 | 2.41 | 35 | 2.41 |
| Limited | 35 | 2.41 | 35 | 2.41 |
| King Ranch | 35 | 2.41 | 35 | 2.41 |
| Platinum | 35 | 2.41 | 35 | 2.41 |
2016 Ford Expedition Tire Pressure Sensor Reset
If the tire pressure monitoring system (TPMS) light is flashing on your 2016 Ford Expedition, it indicates a problem with the tire pressure sensors or that the tire pressure is significantly low. Resetting the tire pressure sensor is essential for accurate monitoring and ensuring safe driving conditions. Here’s how to do it effectively.
Steps to Reset the Tire Pressure Sensor
- Check Tire Pressure: Before resetting the sensor, verify that all tires are inflated to the recommended pressure. Refer to the tire pressure table for specifications.
- Turn On the Ignition: Insert the key into the ignition and turn it to the “On” position without starting the engine.
- Locate the TPMS Reset Button: This button is usually found beneath the steering wheel or in the glove compartment. Consult the owner’s manual if you have trouble finding it.
- Press the Reset Button: Hold the TPMS reset button until the TPMS light blinks three times, then release it.
- Start the Engine: Turn the ignition to the “Off” position and then start the engine. The TPMS light should turn off after a few minutes of driving.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after resetting, it may indicate a malfunction in the system. Here are common causes and solutions:
| Issue | Description | Solution |
|---|---|---|
| Low Tire Pressure | Tires are not inflated to the recommended PSI. | Check and inflate tires to the correct pressure. |
| Faulty Sensor | One or more tire pressure sensors may be malfunctioning. | Inspect and replace faulty sensors as needed. |
| Dead Battery in Sensor | The battery in the tire pressure sensor may be dead. | Replace the sensor if the battery is not replaceable. |
| Temperature Changes | Significant temperature changes can affect tire pressure. | Recheck tire pressure as temperatures fluctuate. |
Tips for Maintaining the TPMS
- Regularly check tire pressure, especially before long trips.
- Replace tires that have damaged or worn sensors.
- Be aware of seasonal changes that may affect tire pressure.
- Consult a professional if the TPMS light remains on after resetting.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the safety and performance of your vehicle. For the 2016 Ford Expedition, correct tire pressure ensures optimal handling, fuel efficiency, and tire longevity. Under-inflated tires can lead to increased rolling resistance, which negatively impacts fuel consumption. Conversely, over-inflated tires can cause uneven wear and reduce traction, especially in adverse weather conditions.
Additionally, tires that are not inflated to the recommended pressure can lead to blowouts, which pose serious safety risks. Regularly checking and maintaining tire pressure is a simple yet effective way to enhance the overall performance and safety of your vehicle.
How to Check Tire Pressure
Checking tire pressure is a straightforward process that can be done using a tire pressure gauge. Follow these steps for accurate results:
- Ensure Tires Are Cold: For the most accurate reading, check tire pressure when the tires are cold, ideally before driving.
- Remove Valve Stem Cap: Unscrew the valve stem cap from the tire you wish to check.
- Use a Tire Pressure Gauge: Press the gauge onto the valve stem and ensure a tight seal to prevent air from escaping. Read the pressure displayed on the gauge.
- Compare with Recommended Pressure: Refer to the tire pressure table for the correct PSI for your specific trim.
- Adjust as Necessary: If the pressure is too low, inflate the tire to the recommended level. If it’s too high, release some air until it reaches the correct pressure.
- Replace the Valve Stem Cap: After checking and adjusting the pressure, make sure to replace the valve stem cap securely.
Useful Tips for Maintaining Tire Pressure
To keep your tires in optimal condition, consider the following tips:
- Check Tire Pressure Monthly: Make it a habit to check tire pressure at least once a month and before long trips.
- Inspect for Damage: Regularly look for signs of wear, punctures, or bulges on your tires.
- Rotate Tires: Rotate your tires every 5,000 to 7,500 miles to promote even wear.
- Monitor Temperature Changes: Be aware that temperature fluctuations can affect tire pressure. For every 10°F change, tire pressure can change by about 1 PSI.
- Use Quality Equipment: Invest in a reliable tire pressure gauge for accurate readings.
- Seek Professional Help: If you notice persistent issues with tire pressure or the TPMS light remains on, consult a professional mechanic.
By following these guidelines, you can ensure that your 2016 Ford Expedition operates safely and efficiently. Regular tire maintenance is a small effort that yields significant benefits.
0 Comments