The 2016 Ford Edge is a versatile mid-size SUV known for its comfort, performance, and advanced technology. One critical aspect of vehicle maintenance that often gets overlooked is tire pressure. Proper tire pressure is essential for optimal handling, fuel efficiency, and safety. Each trim of the Ford Edge may have different specifications, so it’s important to know the correct tire pressure for your specific model.
Maintaining the correct tire pressure not only extends the life of your tires but also enhances overall vehicle performance. In this section, we will provide a detailed tire pressure table for the 2016 Ford Edge, outlining the recommended PSI and BAR for various trims and engine types.
2016 Ford Edge Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| SE 2.0L EcoBoost | 35 | 2.41 | 35 | 2.41 |
| SEL 2.0L EcoBoost | 35 | 2.41 | 35 | 2.41 |
| Titanium 2.0L EcoBoost | 35 | 2.41 | 35 | 2.41 |
| Sport 2.7L EcoBoost | 36 | 2.48 | 36 | 2.48 |
| Base 3.5L V6 | 35 | 2.41 | 35 | 2.41 |
2016 Ford Edge Tire Pressure Sensor Reset
The tire pressure monitoring system (TPMS) in the 2016 Ford Edge is designed to alert drivers when tire pressure is too low. However, after adjusting tire pressure or replacing tires, the TPMS light may continue to flash. Resetting the tire pressure sensor is essential to ensure accurate monitoring and to turn off the warning light.
To reset the TPMS light, follow these steps:
Steps to Reset Tire Pressure Sensor
- Check and adjust tire pressures according to the recommended specifications.
- Turn the ignition to the “On” position without starting the engine.
- Locate the TPMS reset button, usually found beneath the steering wheel.
- Press and hold the reset button until the TPMS light blinks three times, then release it.
- Start the engine and allow the vehicle to run for about 20 minutes to complete the reset.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after resetting, it may indicate a malfunction in the system. Here are common issues to consider:
| Issue | Description | Recommended Action |
|---|---|---|
| Low Tire Pressure | One or more tires may be under-inflated. | Check and inflate tires to the recommended PSI. |
| Faulty Sensor | A tire pressure sensor may be malfunctioning. | Inspect and replace any faulty sensors. |
| Dead Battery in Sensor | The battery in the tire pressure sensor may be dead. | Replace the sensor with a new one. |
| TPMS System Malfunction | The TPMS may have a general malfunction. | Consult a professional mechanic for diagnosis. |
Maintaining proper tire pressure is crucial for driving safety and vehicle performance. If the TPMS light persists after following the reset procedure, it’s advisable to have the system checked by a qualified technician.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is vital for the safety, performance, and longevity of your vehicle. Under-inflated or over-inflated tires can lead to a range of issues, including reduced fuel efficiency, poor handling, and increased tire wear. In extreme cases, improper tire pressure can even result in tire blowouts, which pose serious risks to both the driver and passengers.
Proper tire pressure ensures that the tires make optimal contact with the road, improving traction and stability. Additionally, maintaining the correct pressure can enhance fuel economy, as under-inflated tires create more rolling resistance, causing the engine to work harder. Regularly checking and maintaining tire pressure is a simple yet effective way to ensure your vehicle operates safely and efficiently.
How to Check Tire Pressure
Checking tire pressure is a straightforward process. Follow these steps to ensure your tires are properly inflated:
- Purchase a reliable tire pressure gauge if you don’t already have one.
- Check the recommended tire pressure for your specific Ford Edge model, usually found on the driver’s side door jamb or in the owner’s manual.
- Ensure the tires are cold; tire pressure can increase after driving.
- Remove the valve cap from the tire you want to check.
- Press the tire pressure gauge onto the valve stem firmly to get a reading.
- Note the pressure reading and compare it with the recommended PSI.
- If the pressure is too low, inflate the tire to the recommended level. If it’s too high, release some air until it reaches the correct PSI.
- Replace the valve cap securely after checking.
Useful Tips for Maintaining Proper Tire Pressure
To ensure your tires remain in optimal condition, consider the following tips:
- Check tire pressure at least once a month and before long trips.
- Inspect tires for signs of wear, damage, or irregularities.
- Rotate tires regularly to promote even wear.
- Be mindful of temperature changes; tire pressure can drop in colder weather.
- Use a digital tire pressure gauge for more accurate readings.
- Keep a portable air compressor in your vehicle for emergency inflation.
- If you notice a persistent loss of pressure, have the tires inspected for leaks or damage.
By adhering to these practices, you can enhance the performance and safety of your 2016 Ford Edge while prolonging the life of your tires. Proper tire maintenance is a small investment that pays off significantly in terms of safety and efficiency.
0 Comments