Correct 2016 Dodge Ram 2500 Tire Pressure Guide

The 2016 Dodge Ram 2500 is a robust and versatile truck designed for heavy-duty performance. Ensuring that your tires are properly inflated is crucial for optimal handling, fuel efficiency, and overall vehicle safety. Tire pressure can vary based on the specific trim and engine configuration, making it essential for owners to refer to the correct specifications.

Maintaining the right tire pressure not only enhances performance but also prolongs tire life. This article provides detailed tire pressure information for different trims and engine types of the 2016 Dodge Ram 2500, helping you to keep your vehicle in peak condition.

2016 Dodge Ram 2500 Tire Pressure

Tire Pressure Table for Different Trim/Engine

Resetting the Tire Pressure Sensor on the 2016 Dodge Ram 2500

The tire pressure monitoring system (TPMS) in the 2016 Dodge Ram 2500 is designed to alert you when tire pressure is too low. However, after adjusting tire pressure or changing a tire, you may need to reset the sensor. If the TPMS light is flashing or remains illuminated, it indicates that the system needs your attention.

Steps to Reset the Tire Pressure Sensor

1. Check the Tire Pressure: Ensure all tires are inflated to the recommended PSI levels as specified in the owner’s manual.
2. Turn on the Ignition: Insert the key into the ignition and turn it to the “On” position without starting the engine.
3. Locate the TPMS Reset Button: This button is typically found beneath the steering wheel or on the dashboard.
4. Press and Hold the Reset Button: Hold the reset button until the TPMS light blinks three times, then release it.
5. Start the Engine: Turn the ignition to the “Start” position and let the vehicle run for a few minutes.
6. Check the TPMS Light: The light should turn off after a few minutes of driving. If it remains on, repeat the process.

Tire Pressure Monitoring System Light Flashing

If the TPMS light is flashing, it often signals a malfunction in the system. Here’s what you can do:

• Inspect for Faulty Sensors: Check if any of the tire pressure sensors are damaged or malfunctioning.
• Check Battery Condition: Some TPMS sensors have batteries that may need replacement if they are dead.
• Visit a Professional: If the issue persists, consult a mechanic or tire specialist for a thorough diagnostic.

Tire Pressure Sensor Reset Table

Importance of Maintaining Proper Tire Pressure

Maintaining proper tire pressure is crucial for the overall performance, safety, and longevity of your 2016 Dodge Ram 2500. Under-inflated or over-inflated tires can lead to a variety of issues, including decreased fuel efficiency, uneven tire wear, and compromised handling. Furthermore, incorrect tire pressure can increase the risk of tire blowouts, which can be dangerous on the road.

Proper tire pressure ensures optimal contact with the road surface, improving traction and stability. This is especially important for a heavy-duty truck like the Ram 2500, which may be used for towing or carrying heavy loads. Regularly checking and maintaining the correct tire pressure can enhance safety and performance while also extending the life of your tires.

How to Check Tire Pressure

Checking tire pressure is a straightforward process that should be done regularly, ideally once a month and before long trips. Here’s how to do it:

1. Gather Your Tools: You will need a reliable tire pressure gauge. Digital gauges are often more accurate than analog ones.
2. Check the Recommended Pressure: Refer to the owner’s manual or the sticker located on the driver’s side door jamb for the correct tire pressure.
3. Remove Valve Caps: Unscrew the valve caps from each tire, keeping them in a safe place.
4. Press the Gauge onto the Valve Stem: Firmly press the gauge onto the valve stem and take the reading. Make sure there’s no hissing sound, which indicates air is escaping.
5. Record the Pressure: Note the PSI reading and compare it to the recommended pressure.
6. Adjust as Necessary: If the pressure is too low, use an air compressor to inflate the tire. If it’s too high, release some air until the correct level is reached.
7. Replace Valve Caps: After checking and adjusting the pressure, replace the valve caps to prevent dirt and moisture from entering.

Useful Tips for Maintaining Tire Pressure

To ensure that your tires remain in top condition, consider the following tips:

• Check Tire Pressure When Cold: Tire pressure should be checked when the tires are cold, ideally before driving or at least three hours after driving.
• Monitor Seasonal Changes: Tire pressure can fluctuate with temperature changes. Check your tire pressure more frequently during seasonal transitions.
• Inspect for Damage: Regularly inspect your tires for signs of wear, punctures, or other damage that could affect pressure.
• Rotate Tires Regularly: Rotating your tires every 5,000 to 7,500 miles can help ensure even wear and prolong tire life.
• Use a Reliable Gauge: Invest in a good-quality tire pressure gauge to ensure accurate readings.
• Stay Informed: Familiarize yourself with the TPMS warning lights. If the light comes on, check your tire pressure immediately.

By adhering to these practices, you can significantly enhance the performance and safety of your 2016 Dodge Ram 2500 while ensuring that your tires last longer.