Correct 2016 Dodge Journey Tire Pressure Maintenance

The 2016 Dodge Journey is a versatile crossover SUV that offers a comfortable ride and ample space for passengers and cargo. One of the essential aspects of vehicle maintenance is ensuring that your tires are properly inflated. Maintaining the correct tire pressure not only promotes safety but also enhances fuel efficiency and prolongs tire life. Understanding the appropriate tire pressure for your specific trim or engine type is crucial for optimal performance.

Proper tire pressure varies depending on the specific model and trim of the 2016 Dodge Journey. The recommended tire pressure is typically measured in pounds per square inch (PSI) and can also be converted to bar for reference. Below is a detailed table that outlines the recommended tire pressure for different trims and engine configurations of the 2016 Dodge Journey.

2016 Dodge Journey Tire Pressure

Tire Pressure Table for Different Trim/Engine

2016 Dodge Journey Tire Pressure Sensor Reset

The tire pressure monitoring system (TPMS) in the 2016 Dodge Journey is designed to alert you when tire pressure is too low. However, after adjusting tire pressure or replacing tires, you may need to reset the system. If the tire pressure monitoring light is flashing, it indicates a fault in the system that requires attention. Here’s how to reset the tire pressure sensor effectively.

Steps to Reset the Tire Pressure Sensor

1. Ensure all tires, including the spare, are inflated to the recommended pressure.


2. Turn the ignition to the “ON” position without starting the engine.


3. Locate the TPMS reset button, usually found beneath the steering wheel or on the dashboard.


4. Press and hold the TPMS reset button until the TPMS light blinks three times, then release it.


5. Start the engine and allow it to run for about 20 minutes to complete the reset process.


6. Check if the TPMS light remains off after driving for a short distance.

Tire Pressure Monitoring System Light Flashing

If the TPMS light continues to flash after following the reset procedure, it may indicate a malfunction in the monitoring system or a persistent issue with one or more tires. Here are some potential causes:

When to Seek Professional Help

If the tire pressure monitoring light remains illuminated or continues to flash after resetting the system, consider the following actions:

• Inspect each tire for visible damage or leaks.


• Check for any signs of wear on the tire pressure sensors.


• Consult a certified mechanic or dealership for a comprehensive diagnosis.


• Consider having the TPMS system scanned for error codes.

Proper maintenance of the tire pressure monitoring system ensures your safety on the road. Regularly checking tire pressure and addressing any warning lights promptly can prevent further issues and enhance vehicle performance.

Importance of Maintaining Proper Tire Pressure

Maintaining proper tire pressure is crucial for the overall performance and safety of your vehicle. Under-inflated or over-inflated tires can lead to various issues, including decreased fuel efficiency, uneven tire wear, and compromised handling. In extreme cases, improper tire pressure can result in tire blowouts, putting you and your passengers at risk. Regularly checking and adjusting tire pressure is essential for ensuring a smooth and safe driving experience.

Benefits of Proper Tire Pressure

• Improved Fuel Efficiency: Properly inflated tires reduce rolling resistance, which can lead to better fuel economy.


• Enhanced Safety: Adequate tire pressure ensures better traction and handling, especially in adverse weather conditions.


• Longer Tire Life: Maintaining the correct pressure helps prevent uneven wear and extends the lifespan of your tires.


• Better Performance: Proper tire pressure contributes to optimal vehicle performance, ensuring a comfortable ride.

How to Check Tire Pressure

To ensure your tires are properly inflated, follow these steps to check tire pressure:

1. Gather Equipment: You will need a reliable tire pressure gauge. Digital gauges are often more accurate than manual ones.


2. Check When Cold: For the most accurate reading, check tire pressure when the tires are cold, ideally before driving.


3. Remove Valve Cap: Unscrew the valve cap from the tire you wish to check.


4. Press Gauge: Firmly press the tire pressure gauge onto the valve stem and hold it for a second to get a reading.


5. Read Pressure: Note the PSI reading displayed on the gauge.


6. Compare to Recommendations: Compare the reading with the recommended tire pressure for your specific trim, which can usually be found on the driver’s side door jamb or in the owner’s manual.


7. Adjust as Necessary: If the pressure is too low, add air until it reaches the recommended level. If it’s too high, release some air until it’s correct.


8. Replace Valve Cap: Don’t forget to screw the valve cap back on to protect the valve from dirt and debris.

Useful Tips for Tire Maintenance

To keep your tires in optimal condition, consider the following tips:

• Regular Checks: Check tire pressure at least once a month and before long trips.


• Visual Inspection: Regularly inspect tires for signs of damage, such as cracks, bulges, or foreign objects.


• Rotate Tires: Rotate your tires every 5,000 to 7,500 miles to promote even wear.


• Monitor Tread Depth: Use the penny test to check tread depth. If you can see all of Lincoln’s head, it’s time for new tires.


• Stay Informed: Keep an eye on seasonal changes, as temperature fluctuations can affect tire pressure.

By prioritizing tire pressure maintenance, you can enhance your vehicle’s performance, increase safety, and extend the life of your tires. Regular checks and adjustments are simple yet effective ways to ensure a smooth driving experience.