The 2016 BMW R1200RT is a popular touring motorcycle known for its comfort, performance, and advanced technology. One crucial aspect of motorcycle maintenance is ensuring that the tire pressure is within the manufacturer’s recommended specifications. Proper tire pressure not only enhances performance but also contributes to safety and tire longevity.
Maintaining the correct tire pressure is vital for optimal handling, fuel efficiency, and overall riding experience. This article will provide detailed information regarding the tire pressure specifications for different trims and engines of the 2016 BMW R1200RT.
2016 BMW R1200RT Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Standard | 36 | 2.5 | 42 | 2.9 |
| With Passenger | 36 | 2.5 | 42 | 2.9 |
| With Full Load | 36 | 2.5 | 42 | 2.9 |
2016 BMW R1200RT Tire Pressure Sensor Reset
The tire pressure monitoring system (TPMS) in the 2016 BMW R1200RT is designed to alert the rider when tire pressure is outside the recommended range. If the TPMS light is flashing, it indicates a potential issue that requires attention. Resetting the tire pressure sensor is essential after adjusting tire pressures or replacing tires. Follow the steps below to reset the system effectively.
Steps to Reset Tire Pressure Sensor
- Ensure that all tires are inflated to the recommended pressure.
- Turn the ignition key to the “ON” position without starting the engine.
- Locate the TPMS reset button, usually found near the steering column or dashboard.
- Press and hold the TPMS reset button until the TPMS light blinks three times.
- Release the button and turn off the ignition.
- Start the engine and check if the TPMS light is off.
Tire Pressure Monitoring System Light Troubleshooting
If the TPMS light continues to flash after resetting, further investigation is necessary. The following table outlines potential causes and solutions:
| Issue | Possible Cause | Recommended Action |
|---|---|---|
| TPMS Light Flashing | Low Tire Pressure | Check and inflate tires to recommended pressure. |
| TPMS Light On | Faulty Sensor | Inspect and replace the faulty tire pressure sensor. |
| TPMS Light Blinking | System Malfunction | Consult a professional technician for diagnostics. |
Additional Tips
- Regularly check tire pressure, especially before long rides.
- Monitor the TPMS light for any changes during rides.
- Consult the owner’s manual for specific TPMS instructions.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the performance and safety of your 2016 BMW R1200RT. Incorrect tire pressure can lead to various issues, including decreased fuel efficiency, poor handling, and increased tire wear. Under-inflated tires can cause excessive heat buildup, leading to blowouts, while over-inflated tires can result in a harsh ride and reduced traction. Regularly checking and maintaining the correct tire pressure helps ensure a safer and more enjoyable riding experience.
How to Check Tire Pressure
Checking tire pressure is a straightforward process that should be performed regularly, ideally before each ride. Follow these steps to accurately check the tire pressure on your motorcycle:
- Purchase a reliable tire pressure gauge. Digital gauges are often more accurate and easier to read.
- Ensure that the tires are cold, as pressure readings can increase when tires are hot from riding.
- Remove the valve stem cap from the tire you wish to check.
- Press the tire pressure gauge onto the valve stem firmly to get a reading.
- Record the pressure reading and compare it to the recommended specifications found in your owner’s manual.
- If adjustments are needed, inflate or deflate the tire as necessary and recheck the pressure.
- Replace the valve stem cap securely after checking.
Useful Tips for Maintaining Tire Pressure
To ensure optimal performance and safety, consider the following tips for maintaining proper tire pressure on your BMW R1200RT:
- Check tire pressure at least once a month and before long trips.
- Always use a quality gauge for accurate readings.
- Keep a portable air compressor or a tire inflator in your garage for convenience.
- Inspect tires for visible damage or wear regularly, as these can affect pressure retention.
- Be aware of seasonal changes; tire pressure can drop in colder weather.
- Consider investing in a tire pressure monitoring system (TPMS) for real-time alerts.
By following these guidelines, you can maintain the proper tire pressure on your 2016 BMW R1200RT, ensuring a safer ride and prolonging the life of your tires.
0 Comments