The 2016 BMW R1200GS is a versatile adventure motorcycle known for its powerful performance and reliability. Proper maintenance is crucial for ensuring optimal performance, and one of the most critical aspects of motorcycle maintenance is tire pressure. Incorrect tire pressure can lead to poor handling, increased tire wear, and reduced fuel efficiency. Understanding the recommended tire pressure for different trims and engines can significantly enhance the riding experience.
Maintaining the right tire pressure is essential for safety and performance. This article provides a comprehensive overview of the recommended tire pressures for the 2016 BMW R1200GS, allowing riders to make informed decisions about their motorcycle’s maintenance. Below is a detailed tire pressure table for various trims and engine configurations.
2016 BMW R1200GS Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Standard | 36 | 2.5 | 42 | 2.9 |
| Adventure | 36 | 2.5 | 42 | 2.9 |
| Sport | 36 | 2.5 | 42 | 2.9 |
| Rallye | 36 | 2.5 | 42 | 2.9 |
Resetting the Tire Pressure Sensor on the 2016 BMW R1200GS
The tire pressure monitoring system (TPMS) is a crucial feature in the 2016 BMW R1200GS, alerting riders to any deviations in tire pressure. If the TPMS light is flashing, it indicates that the system needs to be reset. This can happen after adjusting tire pressures or replacing tires. Knowing how to reset the tire pressure sensor is essential for maintaining optimal performance and safety on the road.
To reset the tire pressure sensor, follow these steps:
Steps to Reset the Tire Pressure Sensor
- Ensure that all tires are inflated to the recommended pressure as specified in the tire pressure table.
- Turn on the ignition without starting the engine.
- Locate the TPMS reset button, usually found beneath the steering column or in the glove compartment.
- Press and hold the reset button until the TPMS light blinks three times, then release it.
- Start the engine and drive for a few minutes to allow the system to recalibrate.
Troubleshooting the TPMS Light
If the TPMS light continues to flash after resetting, consider the following:
| Issue | Possible Solution |
|---|---|
| Incorrect Tire Pressure | Check and adjust tire pressure to the recommended levels. |
| Faulty Sensor | Inspect the tire pressure sensors for damage or malfunction. |
| Battery Issues | Check the battery of the TPMS sensor, as low battery can affect performance. |
| System Malfunction | Consult a professional mechanic or authorized BMW service center. |
Understanding the TPMS Light
The TPMS light can indicate different issues:
- Flashing Light: Indicates a problem with the system or that the sensor needs resetting.
- Steady Light: Indicates that one or more tires are under-inflated.
- No Light: Indicates that the system is functioning correctly.
By following these steps and understanding the TPMS light indicators, riders can ensure their 2016 BMW R1200GS operates safely and efficiently.
The Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is critical for the performance, safety, and longevity of your motorcycle. For the 2016 BMW R1200GS, correct tire pressure ensures optimal handling, stability, and fuel efficiency. Under-inflated tires can lead to increased rolling resistance, which not only affects fuel consumption but can also cause excessive tire wear and the risk of blowouts. Conversely, over-inflated tires may result in a harsh ride and reduced traction, especially on uneven surfaces.
How to Check Tire Pressure
Regularly checking tire pressure is essential for safe riding. Here’s how to do it effectively:
- Gather Equipment: You will need a reliable tire pressure gauge. Digital gauges are often more accurate than analog ones.
- Check When Cold: Measure tire pressure when the tires are cold, ideally before riding or after the motorcycle has been parked for several hours.
- Remove Valve Caps: Unscrew the valve caps from each tire’s valve stem.
- Press Gauge Firmly: Press the tire pressure gauge onto the valve stem to get a reading. Ensure a firm connection to avoid air escaping.
- Record the Pressure: Note the PSI (pounds per square inch) and compare it against the recommended pressure in the tire pressure table.
- Replace Valve Caps: After checking, replace the valve caps securely to prevent dirt and moisture from entering.
Useful Tips for Maintaining Tire Pressure
To ensure your tires remain in optimal condition, consider these useful tips:
- Regular Checks: Check tire pressure at least once a month and before long rides.
- Temperature Awareness: Be aware that tire pressure can change with temperature fluctuations. For every 10°F change, tire pressure can vary by approximately 1 PSI.
- Visual Inspections: Regularly inspect tires for signs of wear, cracks, or foreign objects that may compromise integrity.
- Proper Inflation: Always inflate tires to the manufacturer’s recommended pressure, which can be found in the owner’s manual or on a sticker located on the motorcycle.
- Use Quality Equipment: Invest in a quality tire pressure gauge for accurate readings and consider a portable air compressor for adjustments on the go.
- Monitor Tire Wear: Keep an eye on tread wear indicators. Uneven wear can indicate improper inflation or alignment issues.
By adhering to these practices, riders can enhance their safety, improve fuel efficiency, and extend the life of their tires, ensuring a smoother and more enjoyable ride on the 2016 BMW R1200GS.
0 Comments