The 2015 Harley Davidson Street Glide is a popular choice among motorcycle enthusiasts for its blend of style, comfort, and performance. One critical aspect of maintaining this bike’s performance is ensuring the tire pressure is within the manufacturer’s recommended specifications. Proper tire pressure not only enhances handling and stability but also contributes to overall safety and fuel efficiency.
Understanding the correct tire pressure for different trims and engine configurations is essential for riders. This information helps ensure optimal performance and safety on the road. Below is a detailed tire pressure table for the 2015 Harley Davidson Street Glide, providing the recommended PSI and BAR values for various trims and engines.
2015 Harley Davidson Street Glide Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Street Glide (Standard) | 36 | 2.5 | 40 | 2.8 |
| Street Glide Special | 36 | 2.5 | 40 | 2.8 |
| Street Glide CVO | 36 | 2.5 | 40 | 2.8 |
Resetting the Tire Pressure Sensor on the 2015 Harley Davidson Street Glide
The tire pressure monitoring system (TPMS) is crucial for maintaining optimal tire pressure and ensuring rider safety. If the TPMS light on your 2015 Harley Davidson Street Glide is flashing, it indicates a problem with the tire pressure sensors or that the tire pressure needs adjustment. Resetting the tire pressure sensor is a straightforward process that can be done with a few simple steps.
Steps to Reset the Tire Pressure Sensor
- Check Tire Pressure: Before resetting the sensor, ensure that all tires are inflated to the recommended pressure levels as specified in the tire pressure table.
- Turn on the Ignition: Insert the key into the ignition and turn it to the “On” position without starting the engine.
- Locate the TPMS Reset Button: The reset button is typically located under the dashboard or near the steering column.
- Press and Hold the Reset Button: Hold the reset button until the TPMS light blinks three times, then release it.
- Start the Engine: Start the motorcycle and allow it to run for a few minutes. The TPMS light should turn off if the reset was successful.
Troubleshooting a Flashing TPMS Light
If the TPMS light continues to flash after resetting, you may need to troubleshoot further. Here are some common causes and solutions:
| Issue | Possible Cause | Solution |
|---|---|---|
| Flashing TPMS Light | Low Tire Pressure | Check and inflate tires to the recommended pressure. |
| Flashing TPMS Light | Faulty Sensor | Inspect the sensors for damage; replace if necessary. |
| Flashing TPMS Light | Battery Issues | Check the battery condition of the TPMS sensors. |
Additional Tips
- Regularly check tire pressure every month to avoid TPMS issues.
- Consult the owner’s manual for specific instructions related to your model.
- Consider visiting a professional mechanic if problems persist.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is essential for the performance and safety of your 2015 Harley Davidson Street Glide. Incorrect tire pressure can lead to various issues, including reduced fuel efficiency, compromised handling, and increased tire wear. Riding on under-inflated tires can result in overheating, while over-inflated tires can lead to decreased traction and a harsher ride.
Ensuring that your tires are inflated to the recommended levels not only enhances your riding experience but also improves safety on the road. Proper tire pressure helps maintain optimal contact with the road surface, ensuring better grip and stability while cornering or braking.
How to Check Tire Pressure
Checking the tire pressure on your motorcycle is a straightforward process. Follow these steps to ensure accurate readings:
- Gather Equipment: You will need a reliable tire pressure gauge, which can be either digital or analog.
- Check When Tires Are Cold: Measure tire pressure when the tires are cold, ideally before riding or at least three hours after riding.
- Remove Valve Cap: Unscrew the valve cap from the tire you want to check.
- Press Gauge onto Valve Stem: Firmly press the tire pressure gauge onto the valve stem to get a reading.
- Read the Pressure: Check the gauge to see the current tire pressure and compare it to the recommended levels from the manufacturer.
- Reattach Valve Cap: Once done, replace the valve cap securely to prevent dirt from entering.
Useful Tips for Tire Pressure Maintenance
To ensure optimal tire pressure and extend the life of your tires, consider the following tips:
- Check Regularly: Inspect tire pressure at least once a month and before long trips.
- Use a Quality Gauge: Invest in a high-quality tire pressure gauge for accurate readings.
- Monitor Temperature Changes: Tire pressure can fluctuate with temperature changes. Check pressure during seasonal transitions.
- Inspect for Damage: Regularly check tires for signs of wear, punctures, or damage that could affect pressure.
- Inflate to Recommended Levels: Always inflate tires to the manufacturer’s specified PSI levels for both front and rear tires.
- Educate Yourself: Familiarize yourself with the TPMS and its warnings to address issues promptly.
Maintaining proper tire pressure is not just a recommendation; it’s a vital part of responsible motorcycle ownership. Regular checks and adherence to guidelines can significantly enhance your riding experience and safety.
0 Comments