Correct 2015 Dodge Journey Tire Pressure Essentials

The 2015 Dodge Journey is a versatile midsize SUV that offers a blend of comfort and functionality. One crucial aspect of vehicle maintenance is ensuring that the tire pressure is kept within the manufacturer’s recommended levels. Proper tire pressure not only enhances safety but also improves fuel efficiency and extends tire life. Understanding the specific tire pressure requirements for different trims and engines of the Journey is essential for optimal performance.

Maintaining the correct tire pressure is vital for a smooth driving experience. Under-inflated tires can lead to increased wear, reduced handling, and compromised safety. Conversely, over-inflated tires can cause a harsh ride and increase the risk of a blowout. The following table provides detailed information on the recommended tire pressure for various trims and engine configurations of the 2015 Dodge Journey.

2015 Dodge Journey Tire Pressure

Tire Pressure Table for Different Trim/Engine

2015 Dodge Journey Tire Pressure Sensor Reset

The tire pressure monitoring system (TPMS) in the 2015 Dodge Journey is designed to alert drivers when tire pressure is too low. However, after correcting the tire pressure, you may notice that the TPMS light continues to flash. This indicates that the system needs to be reset. Understanding how to reset the tire pressure sensor is crucial for accurate monitoring and ensuring the safety of your vehicle.

Steps to Reset the Tire Pressure Sensor

To reset the tire pressure sensor in your 2015 Dodge Journey, follow these steps:

1. Check Tire Pressures: Ensure all tires, including the spare, are inflated to the recommended PSI as indicated in the owner’s manual or the tire pressure label.


2. Turn on the Ignition: Insert the key and turn it to the “ON” position without starting the engine.


3. Locate the TPMS Reset Button: The reset button is typically found beneath the steering column or near the left side of the dashboard.


4. Press and Hold the Reset Button: Hold the button until the TPMS light blinks three times, then release it.


5. Start the Engine: Turn the key to the “START” position and allow the vehicle to run for about 20 minutes to complete the reset process.

TPMS Light Flashing Issues

If the TPMS light continues to flash after attempting to reset, consider the following troubleshooting steps:

• Check for Tire Damage: Inspect each tire for punctures, cuts, or other damage that may cause air loss.


• Inspect the TPMS Sensors: Ensure that the sensors are functioning properly. A malfunctioning sensor may need replacement.


• Battery Check: TPMS sensors have batteries that can deplete over time. If the battery is dead, the sensor will not send data.


• Relearn Procedure: Some vehicles require a relearn procedure after tire rotation or replacement. Refer to the owner’s manual for specific instructions.

Tire Pressure Monitoring System Light Behavior

The behavior of the TPMS light can indicate different issues:

Importance of Maintaining Proper Tire Pressure

Maintaining proper tire pressure is critical for the overall performance, safety, and longevity of your 2015 Dodge Journey. Incorrect tire pressure can lead to various issues, from decreased fuel efficiency to compromised handling and increased tire wear. Understanding the importance of keeping your tires properly inflated is essential for any vehicle owner.

Benefits of Proper Tire Pressure

• Enhanced Safety: Correct tire pressure improves vehicle stability and handling, reducing the risk of accidents.
• Improved Fuel Efficiency: Properly inflated tires reduce rolling resistance, leading to better fuel economy.
• Extended Tire Life: Maintaining the right pressure minimizes uneven tire wear, prolonging the lifespan of your tires.
• Better Ride Comfort: Proper inflation contributes to a smoother ride by absorbing road imperfections.

How to Check Tire Pressure

Checking your tire pressure is a straightforward process that should be done regularly, ideally once a month and before long trips. Here’s how to do it:

1. Gather Tools: You will need a reliable tire pressure gauge, which can be digital or analog.
2. Check the Recommended PSI: Refer to the owner’s manual or the tire pressure label located on the driver’s side door jamb for the recommended PSI for your tires.
3. Remove Valve Cap: Unscrew the valve cap from the tire you wish to check.
4. Press Gauge on Valve: Firmly press the tire pressure gauge onto the valve stem. A hissing sound indicates air escaping; ensure a tight seal.
5. Read the Pressure: Check the reading on the gauge. Compare it to the recommended PSI.
6. Add or Release Air: If the pressure is too low, add air until it reaches the recommended level. If it’s too high, release some air until it’s correct.
7. Replace Valve Cap: After checking, be sure to replace the valve cap securely to prevent dirt and moisture from entering.

Useful Tips for Maintaining Tire Pressure

Consistent maintenance can help ensure your tires remain in optimal condition. Here are some useful tips:

• Check Pressure When Cold: Always check tire pressure when the tires are cold, as heat from driving can increase pressure readings.
• Inspect Regularly: Make tire pressure checks a part of your regular vehicle maintenance routine.
• Monitor Weather Changes: Be aware that temperature changes can affect tire pressure; pressure decreases in colder weather.
• Use Quality Gauges: Invest in a good quality tire pressure gauge for accurate readings.
• Don’t Forget the Spare: Check the spare tire pressure as well, as it is often overlooked.

By maintaining proper tire pressure, you can enhance your driving experience and ensure the safety and efficiency of your 2015 Dodge Journey.