The 2014 Harley Davidson Street Glide is a popular touring motorcycle known for its comfort and performance. One crucial aspect of maintaining this bike is ensuring that the tire pressure is at the correct level. Proper tire pressure affects handling, safety, and fuel efficiency. It’s essential for riders to be aware of the recommended tire pressure for their specific trim and engine configuration.
Maintaining the right tire pressure is not just a matter of performance; it’s also about safety. Under-inflated or over-inflated tires can lead to dangerous riding conditions. Therefore, understanding the specifications for the 2014 Harley Davidson Street Glide is vital for every owner. Below is a detailed tire pressure table for different trims and engine configurations of the 2014 Street Glide.
2014 Harley Davidson Street Glide Tire Pressure
Recommended Tire Pressure Table
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Street Glide (103 Engine) | 36 | 2.5 | 40 | 2.8 |
| Street Glide Special (103 Engine) | 36 | 2.5 | 40 | 2.8 |
| Street Glide (110 Engine) | 36 | 2.5 | 40 | 2.8 |
| Street Glide Special (110 Engine) | 36 | 2.5 | 40 | 2.8 |
Resetting the Tire Pressure Sensor for 2014 Harley Davidson Street Glide
The tire pressure monitoring system (TPMS) in the 2014 Harley Davidson Street Glide is designed to alert the rider when tire pressure is outside the recommended range. If the TPMS light is flashing, it indicates that the tire pressure sensor needs to be reset. This can happen after a tire change, pressure adjustment, or if the sensor has become uncalibrated. Knowing how to reset the sensor is crucial for maintaining accurate readings and ensuring safe riding conditions.
Steps to Reset the Tire Pressure Sensor
- Ensure that all tires are inflated to the recommended pressure.
- Turn the ignition switch to the “On” position without starting the engine.
- Locate the TPMS reset button, typically found under the seat or on the left handlebar controls.
- Press and hold the TPMS reset button until the TPMS light blinks three times, then release it.
- Start the engine and allow it to run for a few minutes to complete the reset process.
- Check the TPMS light; it should turn off if the reset was successful.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after resetting, it may indicate a more serious issue. Here are some possible reasons:
| Issue | Description |
|---|---|
| Low Tire Pressure | One or more tires may be under-inflated. Check and adjust pressures as needed. |
| Faulty Sensor | The tire pressure sensor may be malfunctioning or damaged. Consider replacing it. |
| Battery Issues | The battery in the tire pressure sensor may be dead. Replacement is necessary. |
| System Malfunction | There could be an issue with the TPMS itself. Consult a professional mechanic. |
Tips for Troubleshooting
- Regularly check tire pressures to prevent sensor issues.
- Keep an eye on the TPMS light; don’t ignore it.
- Consult the owner’s manual for specific instructions related to your model.
- If the problem persists, seek professional assistance.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is essential for the performance and safety of your motorcycle. For the 2014 Harley Davidson Street Glide, correct tire pressure can significantly impact handling, stability, and overall ride quality. Under-inflated tires can lead to poor traction, increased tire wear, and higher fuel consumption. Conversely, over-inflated tires can reduce contact with the road, leading to a harsher ride and diminished control.
Regularly checking and adjusting tire pressure can prevent potential accidents and enhance the longevity of your tires. Additionally, proper tire pressure contributes to better fuel efficiency, allowing you to get more miles per gallon. In summary, maintaining the correct tire pressure is not just a maintenance task; it’s a critical component of safe riding.
How to Check Tire Pressure
Checking the tire pressure on your Street Glide is straightforward. Follow these steps for an accurate reading:
- Purchase a reliable tire pressure gauge if you don’t already have one.
- Ensure the tires are cold, as pressure increases with heat from riding.
- Remove the valve stem cap from the tire you want to check.
- Press the tire pressure gauge onto the valve stem firmly to get a reading.
- Note the PSI reading and compare it to the recommended tire pressure listed in your owner’s manual.
- If the pressure is too low or too high, adjust accordingly by adding or releasing air.
- Replace the valve stem cap securely.
Useful Tips for Tire Pressure Maintenance
To ensure optimal performance and safety, consider the following tips:
- Check tire pressure at least once a month and before long trips.
- Use a reliable and accurate tire pressure gauge.
- Monitor tire pressure after significant temperature changes, as cold weather can decrease pressure.
- Inspect tires for visible damage or wear, which can affect pressure readings.
- Keep a portable air compressor or tire inflator handy for on-the-go adjustments.
- Be aware of the load you are carrying; heavier loads may require higher tire pressure.
- Consult your owner’s manual for specific recommendations based on your riding style and conditions.
By following these guidelines, you can maintain proper tire pressure and ensure a safe and enjoyable riding experience on your Harley Davidson Street Glide.
0 Comments