The 2013 Hyundai Veloster is a unique and stylish compact car that combines sporty performance with practical features. One of the essential aspects of vehicle maintenance is ensuring that the tire pressure is at the recommended levels. Proper tire pressure not only enhances fuel efficiency but also contributes to the overall safety and handling of the vehicle.

Maintaining the correct tire pressure is crucial for the longevity of your tires and the performance of your Veloster. This article provides detailed information about the recommended tire pressure settings for different trim levels and engine configurations of the 2013 Hyundai Veloster.

2013 Hyundai Veloster Tire Pressure

Tire Pressure Table for Different Trim/Engine

Trim/Engine Front Tire Pressure (PSI) Front Tire Pressure (BAR) Rear Tire Pressure (PSI) Rear Tire Pressure (BAR)
Base 32 2.2 30 2.1
Turbo 33 2.3 31 2.2
Ultimate 32 2.2 30 2.1
Turbo Ultimate 33 2.3 31 2.2

2013 Hyundai Veloster Tire Pressure Sensor Reset

The tire pressure monitoring system (TPMS) in the 2013 Hyundai Veloster is designed to alert drivers when tire pressure is too low. However, after inflating the tires to the recommended pressure, the TPMS light may still remain illuminated or flash. This indicates that the system needs to be reset. Knowing how to reset the tire pressure sensor is essential for maintaining proper tire pressure and ensuring safety on the road.

To reset the TPMS, follow these steps:

Steps to Reset the Tire Pressure Sensor


  1. Ensure all tires are inflated to the recommended pressure as indicated in the owner’s manual.

  2. Turn the ignition to the “ON” position, but do not start the engine.

  3. Locate the TPMS reset button, usually found beneath the steering wheel or near the fuse box.

  4. Press and hold the TPMS reset button until the TPMS light blinks three times, then release it.

  5. Start the engine and allow the vehicle to run for about 20 minutes to complete the reset process.

If the TPMS light continues to flash or remains on after resetting, further investigation may be necessary.

Tire Pressure Monitoring System Light Flashing

The TPMS light may flash for various reasons, indicating potential issues. Here are common causes for a flashing TPMS light:

Cause Description
Low Tire Pressure One or more tires are under-inflated, requiring immediate attention.
Faulty TPMS Sensor A sensor may be malfunctioning, preventing accurate readings.
Temperature Changes Significant temperature drops can cause tire pressure to decrease.
Improper Tire Installation New tires may not have the TPMS sensors properly installed or synced.

If the TPMS light continues to flash after following the reset procedure, it is advisable to consult a professional mechanic for further diagnosis. Maintaining the tire pressure monitoring system is vital for vehicle safety and performance.

Importance of Maintaining Proper Tire Pressure

Maintaining proper tire pressure is crucial for the overall performance and safety of your vehicle. For the 2013 Hyundai Veloster, correct tire pressure can significantly affect handling, fuel efficiency, and tire longevity. Under-inflated tires can lead to increased rolling resistance, which in turn reduces fuel efficiency. Conversely, over-inflated tires can result in a harsh ride and uneven tire wear.

Proper tire pressure also plays a vital role in ensuring optimal traction and braking performance. When tires are inflated to the recommended levels, they provide better contact with the road, improving grip and responsiveness. This is especially important in adverse weather conditions, where maintaining control is essential for safe driving.

How to Check Tire Pressure

Checking the tire pressure is a straightforward process that can be done at home or at a gas station. Here’s how to do it:


  1. Gather the necessary tools: a reliable tire pressure gauge and an air compressor (if needed).

  2. Ensure that the tires are cold, as pressure readings can be inaccurate if the tires have been driven on recently.

  3. Remove the valve stem cap from the tire you want to check.

  4. Press the tire pressure gauge onto the valve stem and take the reading. Make sure to press firmly to avoid air leaks.

  5. Compare the reading to the recommended tire pressure found in the owner’s manual or on the driver’s side door jamb.

  6. If the pressure is too low, use an air compressor to inflate the tire to the correct level. If it’s too high, release some air until it reaches the recommended pressure.

  7. Replace the valve stem cap securely once you’re done.

Useful Tips for Tire Maintenance

To ensure your tires remain in good condition, consider the following tips:


  • Check tire pressure at least once a month and before long trips.

  • Inspect tires for signs of wear or damage, such as cracks or bulges.

  • Rotate your tires every 5,000 to 7,500 miles to promote even wear.

  • Align your wheels if you notice uneven tire wear or if the vehicle pulls to one side.

  • Replace tires that have tread wear indicators showing, indicating they are worn out.

By regularly checking and maintaining proper tire pressure, you can enhance the performance, safety, and lifespan of your 2013 Hyundai Veloster. Taking these simple steps can lead to a smoother ride and better fuel efficiency, ultimately saving you money in the long run.

Categories: Hyundai

0 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *