The 2013 Hyundai Santa Fe Sport is a versatile crossover SUV that combines style, performance, and practicality. One crucial aspect of maintaining the vehicle’s performance and safety is ensuring the tires are inflated to the correct pressure. Proper tire pressure not only enhances fuel efficiency but also improves handling and extends tire life.

Understanding the specific tire pressure requirements for different trims and engine options is essential for every owner. This guide provides detailed information on the recommended tire pressures for the 2013 Hyundai Santa Fe Sport, helping you keep your vehicle in optimal condition.

2013 Hyundai Santa Fe Sport Tire Pressure

Tire Pressure Table for Different Trim/Engine

Trim/Engine Front Tire Pressure (PSI) Front Tire Pressure (BAR) Rear Tire Pressure (PSI) Rear Tire Pressure (BAR)
Base 2.4L 32 2.2 32 2.2
Premium 2.4L 32 2.2 32 2.2
Sport 2.0T 34 2.4 34 2.4
Limited 2.0T 34 2.4 34 2.4
Ultimate 2.0T 34 2.4 34 2.4

2013 Hyundai Santa Fe Sport Tire Pressure Sensor Reset

The tire pressure monitoring system (TPMS) in the 2013 Hyundai Santa Fe Sport is designed to alert drivers when tire pressure is too low. However, after inflating the tires to the correct pressure, the TPMS light may still flash or remain illuminated. Resetting the tire pressure sensor is essential to ensure accurate monitoring and to turn off the warning light.

Steps to Reset the Tire Pressure Sensor


  1. Ensure all tires are inflated to the recommended pressure.

  2. Turn on the vehicle’s ignition without starting the engine.

  3. Locate the TPMS reset button, usually found beneath the steering wheel or in the glove box.

  4. Press and hold the reset button until the TPMS light blinks three times, then release it.

  5. Start the engine and wait a few moments to ensure the warning light turns off.

Tire Pressure Monitoring System Light Flashing

If the TPMS light continues to flash after following the reset steps, there may be an underlying issue. Here are some potential causes:

Issue Description
Low Tire Pressure One or more tires may still be under-inflated. Check all tires again.
Faulty Sensor The TPMS sensor in one or more tires may be malfunctioning and needs replacement.
Battery Issues The battery in the TPMS sensor may be dead, requiring a sensor replacement.
System Malfunction There could be a fault in the TPMS system itself that requires professional diagnosis.

When to Seek Professional Help

If the TPMS light remains on or continues to flash despite resetting the sensor and checking the tire pressures, it is advisable to consult a certified technician. They can perform a thorough inspection and diagnose any issues with the TPMS or tires. Regular maintenance of the tire pressure monitoring system is crucial for safe driving and optimal vehicle performance.

Importance of Maintaining Proper Tire Pressure

Maintaining proper tire pressure is critical for the overall performance and safety of your vehicle. Under-inflated or over-inflated tires can lead to various issues, including reduced fuel efficiency, poor handling, and increased tire wear. Additionally, improper tire pressure can compromise your safety on the road, increasing the risk of tire blowouts and accidents.

Benefits of Proper Tire Pressure


  • Improved Fuel Efficiency: Correctly inflated tires reduce rolling resistance, leading to better fuel economy.

  • Enhanced Handling: Proper tire pressure ensures better traction and handling, especially in adverse weather conditions.

  • Extended Tire Life: Maintaining the right pressure helps prevent uneven tire wear, extending the lifespan of your tires.

  • Safety: Properly inflated tires reduce the risk of blowouts and improve overall vehicle stability.

How to Check Tire Pressure

Checking your tire pressure is a straightforward process that should be done regularly, ideally once a month and before long trips. Here’s how to do it:


  1. Obtain a reliable tire pressure gauge. Digital or dial gauges are recommended for accuracy.

  2. Ensure the tires are cold, as heat from driving can increase pressure readings.

  3. Remove the valve cap from one tire and press the gauge onto the valve stem firmly.

  4. Read the pressure on the gauge and compare it to the recommended pressure listed on the driver’s side door jamb or in the owner’s manual.

  5. If the pressure is low, add air until it reaches the recommended level. If it’s too high, release some air until it’s correct.

  6. Replace the valve cap securely.

Useful Tips for Maintaining Tire Pressure


  • Regular Inspections: Check tire pressure at least once a month and before long trips.

  • Temperature Considerations: Remember that tire pressure can change with temperature. For every 10°F drop in temperature, tire pressure can decrease by about 1 PSI.

  • Use a Quality Gauge: Invest in a good tire pressure gauge for accurate readings.

  • Visual Inspections: Regularly inspect your tires for visible signs of wear or damage, including bulges or cracks.

  • Rotate Tires: Rotate your tires regularly to promote even wear and maintain proper pressure across all tires.

By prioritizing tire pressure maintenance, you can ensure the safety and efficiency of your 2013 Hyundai Santa Fe Sport. Regular checks and adjustments will lead to a smoother ride and longer-lasting tires.

Categories: Hyundai

0 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *