The 2013 Harley Davidson Street Glide is a popular touring motorcycle known for its comfort and performance. One crucial aspect of maintaining its performance is ensuring that the tire pressure is within the recommended range. Proper tire pressure affects handling, fuel efficiency, and overall safety. Riders should be aware of the specific tire pressure requirements for their model to optimize performance and longevity.
Understanding the correct tire pressure for your Harley Davidson Street Glide is essential for a safe and enjoyable ride. This information varies depending on the trim and engine type. Below, you will find detailed tables that outline the recommended tire pressures in both PSI and BAR for different configurations of the 2013 Harley Davidson Street Glide.
2013 Harley Davidson Street Glide Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine Type | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Standard | 36 | 2.48 | 40 | 2.76 |
| Special | 36 | 2.48 | 40 | 2.76 |
| With Passenger | 36 | 2.48 | 42 | 2.90 |
| With Load | 36 | 2.48 | 42 | 2.90 |
2013 Harley Davidson Street Glide Tire Pressure Sensor Reset
If the tire pressure monitoring system (TPMS) light on your 2013 Harley Davidson Street Glide is flashing, it indicates that there is an issue with the tire pressure or the sensor itself. Resetting the tire pressure sensor is a straightforward process, but it’s essential to ensure that the tire pressures are correct before proceeding. This guide will walk you through the steps to reset the tire pressure sensor effectively.
Steps to Reset the Tire Pressure Sensor
- Check Tire Pressure: Use a tire pressure gauge to confirm that all tires are inflated to the recommended PSI.
- Turn on the Ignition: Without starting the engine, turn the ignition switch to the “On” position.
- Locate the TPMS Reset Button: This is usually found under the dashboard or near the steering column.
- Press the Reset Button: Hold the reset button until the TPMS light blinks three times, then release it.
- Start the Engine: After releasing the button, start the engine and let it run for a few minutes.
- Check for TPMS Light: The TPMS light should turn off if the reset was successful.
Tire Pressure Monitoring System Light Troubleshooting
If the TPMS light continues to flash after resetting, you may need to troubleshoot further. Here are some common issues:
| Issue | Possible Cause | Solution |
|---|---|---|
| Light Remains On | Under-inflated Tire | Check and inflate all tires to the recommended PSI. |
| Light Flashes | Faulty Sensor | Inspect the sensors for damage or corrosion. |
| Light Intermittently Flashes | Temperature Changes | Allow tires to stabilize and check pressure again. |
| Light Stays On After Reset | System Malfunction | Consult a professional mechanic for diagnostics. |
Additional Tips for TPMS Maintenance
- Regularly check tire pressure, especially before long trips.
- Replace tire sensors every 5-7 years or as recommended.
- Keep an eye on temperature changes that can affect tire pressure.
- Consult your owner’s manual for specific guidelines related to your model.
Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the performance and safety of your motorcycle. For the 2013 Harley Davidson Street Glide, proper tire pressure ensures optimal handling, fuel efficiency, and tire longevity. Under-inflated tires can lead to poor handling and increased tire wear, while over-inflated tires can compromise the bike’s stability. Regularly checking and adjusting tire pressure is an essential part of motorcycle maintenance.
Why Proper Tire Pressure Matters
Proper tire pressure affects several aspects of riding:
- Safety: Correct tire pressure enhances grip and stability, reducing the risk of accidents.
- Fuel Efficiency: Properly inflated tires improve fuel economy by reducing rolling resistance.
- Tire Longevity: Maintaining the recommended pressure extends the life of your tires, saving you money in the long run.
- Handling: Proper tire pressure ensures that your motorcycle handles predictably, making for a safer ride.
How to Check Tire Pressure
Checking tire pressure is a simple process that should be done regularly. Here’s how to do it:
- Get a Tire Pressure Gauge: Use a reliable analog or digital tire pressure gauge.
- Check When Tires Are Cold: Measure tire pressure when the tires are cold, ideally before riding.
- Remove Valve Stem Cap: Unscrew the valve stem cap from the tire you want to check.
- Press Gauge onto Valve Stem: Firmly press the gauge onto the valve stem to get a reading.
- Read the Pressure: Check the gauge for the PSI reading and compare it to the recommended pressure.
- Reinflate if Necessary: If the pressure is low, inflate the tire to the recommended PSI.
- Replace Valve Stem Cap: Always put the valve stem cap back on after checking.
Useful Tips for Tire Pressure Maintenance
To ensure your tires are always at the correct pressure, consider these tips:
- Check tire pressure at least once a month and before long trips.
- Invest in a quality tire pressure gauge for accurate readings.
- Be aware that temperature changes can affect tire pressure; check more frequently during seasonal changes.
- Keep a portable air compressor or tire inflator handy for quick adjustments.
- Regularly inspect tires for signs of wear, damage, or punctures.
- Consult your owner’s manual for specific tire pressure recommendations for different loads.
0 Comments