The 2013 Ford Escape is a compact SUV that offers a combination of performance, comfort, and versatility. One critical aspect of ensuring optimal performance and safety is maintaining the correct tire pressure. Proper tire pressure not only enhances fuel efficiency but also contributes to better handling and tire longevity.
Understanding the specific tire pressure requirements for different trims and engine types is essential for any 2013 Ford Escape owner. Below, you will find detailed information on the recommended tire pressure for various configurations of the vehicle, measured in both PSI (pounds per square inch) and BAR (barometric pressure).
2013 Ford Escape Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim Level | Engine Type | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|---|
| Base | 2.5L I4 | 32 | 2.21 | 32 | 2.21 |
| SE | 2.5L I4 | 32 | 2.21 | 32 | 2.21 |
| SEL | 2.5L I4 | 32 | 2.21 | 32 | 2.21 |
| Limited | 2.5L I4 | 32 | 2.21 | 32 | 2.21 |
| SE | 1.6L EcoBoost I4 | 35 | 2.41 | 35 | 2.41 |
| SEL | 1.6L EcoBoost I4 | 35 | 2.41 | 35 | 2.41 |
| Limited | 1.6L EcoBoost I4 | 35 | 2.41 | 35 | 2.41 |
| SE | 2.5L I4 (Hybrid) | 32 | 2.21 | 32 | 2.21 |
2013 Ford Escape Tire Pressure Sensor Reset
The tire pressure monitoring system (TPMS) in the 2013 Ford Escape is designed to alert drivers when tire pressure is too low. However, after adjusting tire pressure or replacing tires, the TPMS light may remain illuminated or flash, indicating that the system needs to be reset. Understanding how to reset the tire pressure sensor is crucial for ensuring the system functions properly.
Steps to Reset Tire Pressure Sensor
- Check Tire Pressure: Ensure all tires are inflated to the recommended PSI levels listed in the owner’s manual.
- Turn on the Ignition: Insert the key and turn the ignition to the “On” position without starting the engine.
- Locate the TPMS Reset Button: This is usually found beneath the steering wheel or on the dashboard.
- Press and Hold the Reset Button: Hold the button until the TPMS light blinks three times, then release it.
- Start the Engine: Turn the ignition to the “Off” position, then start the engine again.
- Drive the Vehicle: Drive for about 10 minutes at speeds above 50 mph to allow the system to recalibrate.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after following the reset procedure, it may indicate a malfunction. Here are some common reasons for a flashing light:
| Issue | Description |
|---|---|
| Low Tire Pressure | One or more tires may still be under-inflated. |
| TPMS Sensor Malfunction | The sensor in one of the tires may be faulty or damaged. |
| Battery Issues | The battery in the TPMS sensor may be dead, requiring replacement. |
| Improper Installation | If tires were recently replaced, the sensors may not have been installed correctly. |
What to Do Next
If the TPMS light remains flashing after resetting, consider these actions:
- Recheck tire pressures to ensure they are at the recommended levels.
- Inspect each tire for visible damage or issues.
- Consult a professional mechanic to diagnose and repair any sensor malfunctions.
- Consider replacing the TPMS sensors if they are outdated or defective.
Importance of Maintaining Proper Tire Pressure
Maintaining the correct tire pressure is essential for the overall performance, safety, and efficiency of your vehicle. For the 2013 Ford Escape, proper tire pressure contributes to optimal handling, fuel economy, and tire lifespan. Under-inflated tires can lead to increased rolling resistance, resulting in lower fuel efficiency and higher emissions. Conversely, over-inflated tires can cause uneven wear and a harsher ride.
Properly inflated tires also enhance safety. They provide better traction, reduce the risk of blowouts, and help maintain control during adverse driving conditions. Regularly checking and maintaining the recommended tire pressure can prevent costly repairs and ensure a smoother driving experience.
How to Check Tire Pressure
Checking your tire pressure is a straightforward process that can be done at home or at a gas station. Follow these steps for an accurate reading:
- Gather Your Tools: You will need a reliable tire pressure gauge. Digital gauges are often easier to read, but dial gauges work just as well.
- Know the Recommended Pressure: Refer to the owner’s manual or the sticker located on the driver’s side door jamb for the correct PSI for your vehicle.
- Check When Cold: Tire pressure should be checked when the tires are cold, ideally before driving or after the vehicle has been parked for at least three hours.
- Remove Valve Cap: Unscrew the valve cap from the tire you wish to check.
- Press the Gauge: Firmly press the tire pressure gauge onto the valve stem. Ensure a good seal to avoid air escaping.
- Read the Pressure: Check the reading on the gauge. If it’s below or above the recommended PSI, you’ll need to adjust the pressure accordingly.
- Replace Valve Cap: After checking, replace the valve cap securely to prevent dirt and moisture from entering.
Useful Tips for Tire Pressure Maintenance
To ensure that your tires remain properly inflated, consider the following tips:
- Check Regularly: Make it a habit to check your tire pressure at least once a month and before long trips.
- Invest in a Quality Gauge: A good tire pressure gauge can provide accurate readings and help you maintain proper pressure.
- Monitor Temperature Changes: Tire pressure can fluctuate with temperature changes. For every 10°F change in temperature, tire pressure can change by about 1 PSI.
- Inspect for Damage: Regularly inspect tires for cuts, punctures, or bulges that may affect pressure.
- Don’t Forget the Spare: Ensure that your spare tire is also properly inflated, as it can be a lifesaver in emergencies.
- Use Nitrogen: Consider filling your tires with nitrogen instead of air. Nitrogen retains pressure longer and reduces fluctuations.
By maintaining proper tire pressure and following these guidelines, you can enhance the safety, performance, and longevity of your 2013 Ford Escape.
0 Comments