The 2013 Dodge Journey is a versatile crossover SUV that offers a comfortable ride and ample cargo space. One of the key aspects of maintaining optimal performance and safety in any vehicle is ensuring that the tire pressure is at the recommended levels. Proper tire pressure not only enhances fuel efficiency but also contributes to better handling and extends the lifespan of the tires.
Understanding the specific tire pressure requirements for different trims and engine configurations of the 2013 Dodge Journey is essential for every owner. This information can help drivers maintain their vehicle effectively and avoid potential issues related to under-inflation or over-inflation of tires.
2013 Dodge Journey Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| Base Model | 32 | 2.2 | 32 | 2.2 |
| SXT | 32 | 2.2 | 32 | 2.2 |
| Limited | 35 | 2.4 | 35 | 2.4 |
| R/T | 35 | 2.4 | 35 | 2.4 |
2013 Dodge Journey Tire Pressure Sensor Reset
The tire pressure monitoring system (TPMS) in the 2013 Dodge Journey is designed to alert drivers when tire pressure is too low or if there is a malfunction in the system. If the TPMS light is flashing, it indicates a problem that needs to be addressed. Resetting the tire pressure sensor is a straightforward process that can help ensure your vehicle operates safely and efficiently.
Steps to Reset the Tire Pressure Sensor
- Check the Tire Pressure:
- Use a tire pressure gauge to measure the pressure in all four tires.
- Compare the readings to the recommended pressures listed in the owner’s manual or on the driver’s side door jamb.
- Inflate or Deflate Tires:
- Adjust the tire pressures as needed to match the recommended specifications.
- Turn the Ignition On:
- Do not start the engine; just turn the ignition key to the “On” position.
- Locate the TPMS Reset Button:
- This button is typically found beneath the steering wheel or on the dashboard.
- Press and Hold the TPMS Reset Button:
- Hold the button until the TPMS light blinks three times and then turns off.
- Turn Off the Ignition:
- Turn the ignition off and wait for a few seconds.
- Start the Engine:
- Start the engine and check if the TPMS light remains off.
Common Reasons for TPMS Light Flashing
| Issue | Description |
|---|---|
| Low Tire Pressure | One or more tires have pressure below the recommended level. |
| Faulty Sensor | The tire pressure sensor may be malfunctioning or damaged. |
| Temperature Changes | Significant changes in temperature can affect tire pressure. |
| Replaced Tires | New tires may require sensor reprogramming or resetting. |
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the overall safety, performance, and efficiency of your 2013 Dodge Journey. Under-inflated or over-inflated tires can lead to various problems, including reduced fuel efficiency, uneven tire wear, and compromised handling. Additionally, incorrect tire pressure can increase the risk of tire blowouts, especially at high speeds.
Proper tire pressure ensures that your vehicle handles well on the road, providing better traction and stability. It also contributes to a smoother ride and enhances braking performance. Regularly checking and maintaining the correct tire pressure can extend the lifespan of your tires, saving you money on replacements in the long run.
How to Check Tire Pressure
Checking the tire pressure is a simple process that can be done at home or at a service station. Follow these steps to ensure accurate readings:
- Gather Your Tools:
- A reliable tire pressure gauge (digital or manual).
- A portable air compressor or access to an air pump.
- Check Tire Pressure When Cold:
- For the most accurate reading, check tire pressure when the tires are cold, ideally before driving.
- Remove Valve Stem Caps:
- Unscrew the valve stem caps on each tire and set them aside.
- Use the Tire Pressure Gauge:
- Press the gauge firmly onto the valve stem to get a reading.
- Note the PSI reading displayed on the gauge.
- Compare with Recommended Levels:
- Refer to the owner’s manual or the sticker on the driver’s side door jamb for the recommended tire pressure.
- Adjust Tire Pressure as Needed:
- If the pressure is too low, inflate the tire using an air compressor.
- If it’s too high, release some air until it reaches the recommended level.
- Replace Valve Stem Caps:
- Once you have checked and adjusted the pressure, replace the valve stem caps securely.
Useful Tips for Maintaining Tire Pressure
- Check Tire Pressure Monthly:
- Make it a habit to check your tire pressure at least once a month, and before long trips.
- Inspect Tires Regularly:
- Look for signs of wear or damage, such as cracks or bulges, which could indicate underlying issues.
- Monitor Temperature Changes:
- Be aware that tire pressure can drop in colder temperatures, so check more frequently during winter.
- Use Quality Equipment:
- Invest in a good tire pressure gauge for accurate readings.
- Don’t Forget the Spare Tire:
- Check the spare tire’s pressure as well; it’s often overlooked but essential in emergencies.
0 Comments