2012 Hyundai Elantra is a compact car known for its efficiency and reliability. One of the critical aspects of maintaining this vehicle is ensuring that the tire pressure is at the recommended levels. Proper tire pressure not only enhances fuel efficiency but also contributes to the overall safety and performance of the car.

Maintaining the correct tire pressure is essential for the longevity of the tires and the vehicle’s handling. Under-inflated tires can lead to increased wear and tear, while over-inflated tires may cause a harsh ride and reduce traction. Below is a detailed tire pressure table for different trims and engines of the 2012 Hyundai Elantra.

2012 Hyundai Elantra Tire Pressure

Tire Pressure Table for Different Trim/Engine

Trim/Engine Front Tire Pressure (PSI) Front Tire Pressure (BAR) Rear Tire Pressure (PSI) Rear Tire Pressure (BAR)
GLS 32 2.2 30 2.1
Limited 32 2.2 30 2.1
SE 32 2.2 30 2.1
Base 32 2.2 30 2.1

2012 Hyundai Elantra Tire Pressure Sensor Reset

If the tire pressure monitoring system (TPMS) light is flashing on your 2012 Hyundai Elantra, it indicates that there is an issue with the tire pressure sensors. This could be due to low tire pressure or a malfunctioning sensor. Resetting the tire pressure sensor is a straightforward process that can help resolve the issue and ensure that your vehicle is operating safely.

Steps to Reset Tire Pressure Sensor


  1. Check Tire Pressure: Before resetting the sensor, ensure all tires are inflated to the recommended PSI levels.

  2. Turn on the Ignition: Insert the key and turn the ignition to the “ON” position without starting the engine.

  3. Locate the TPMS Reset Button: This is usually found beneath the steering wheel or in the glove compartment.

  4. Press and Hold the Reset Button: Hold the button until the TPMS light blinks three times, then release it.

  5. Start the Engine: Turn the ignition off and then start the engine. The TPMS light should turn off.

Tire Pressure Monitoring System Light Flashing

If the TPMS light continues to flash after following the reset procedure, it may indicate a deeper issue. Here are some common causes:

Issue Description
Low Tire Pressure One or more tires may be under-inflated, requiring immediate attention.
Faulty Tire Pressure Sensor The sensor itself may be malfunctioning and need replacement.
Damaged Tire A punctured or damaged tire can trigger the TPMS light.
Battery Issues The battery in the tire pressure sensor may be dead and require replacement.

When to Seek Professional Help

If you have reset the tire pressure sensor and the TPMS light remains on or continues to flash, it’s advisable to consult a professional technician. They can perform a thorough diagnostic to identify and resolve any underlying issues.

Importance of Maintaining Proper Tire Pressure

Maintaining the correct tire pressure is vital for the overall performance, safety, and longevity of your vehicle. Proper tire pressure affects not only fuel efficiency but also handling and braking. Under-inflated tires can lead to excessive wear, reduced traction, and increased risk of tire blowouts. Conversely, over-inflated tires can cause a harsh ride and uneven wear.

Benefits of Proper Tire Pressure


  • Enhanced Fuel Efficiency: Correct tire pressure can improve gas mileage, saving you money at the pump.

  • Improved Safety: Properly inflated tires provide better traction, reducing the risk of accidents.

  • Longer Tire Life: Maintaining the right pressure prevents premature tire wear, extending their lifespan.

  • Better Handling: Proper tire pressure improves vehicle handling, making for a smoother and more responsive driving experience.

How to Check Tire Pressure

Regularly checking your tire pressure is an essential part of vehicle maintenance. Here’s how to do it:


  1. Gather Your Tools: You will need a reliable tire pressure gauge.

  2. Check the Recommended Pressure: Refer to the owner’s manual or the sticker on the driver’s side door jamb for the recommended PSI.

  3. Remove the Valve Cap: Unscrew the valve cap from the tire you want to check.

  4. Press the Gauge: Firmly press the tire pressure gauge onto the valve stem to get a reading. Make sure there’s no hissing sound, which indicates air escaping.

  5. Read the Pressure: Check the gauge reading and compare it to the recommended PSI.

  6. Adjust as Necessary: If the pressure is too low, add air until it reaches the recommended level. If it’s too high, release some air.

  7. Replace the Valve Cap: After checking, make sure to screw the valve cap back on securely.

Useful Tips for Maintaining Tire Pressure


  • Check Regularly: Inspect your tire pressure at least once a month and before long trips.

  • Monitor Changes: Be aware of changes in temperature, as fluctuations can affect tire pressure.

  • Inspect Tires Visually: Look for signs of wear, damage, or uneven tread, which can indicate pressure issues.

  • Use a Quality Gauge: Invest in a good tire pressure gauge for accurate readings.

  • Don’t Forget the Spare: Check the spare tire’s pressure as well; it’s often overlooked but equally important.

By following these guidelines and maintaining proper tire pressure, you can ensure a safer, more efficient driving experience with your 2012 Hyundai Elantra.

Categories: Hyundai

0 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *