The 2010 Dodge Charger is a popular full-size sedan known for its powerful performance and sleek design. One crucial aspect of maintaining this vehicle is ensuring that the tire pressure is at the recommended levels. Proper tire pressure not only enhances driving safety but also improves fuel efficiency and prolongs tire life.

Understanding the specific tire pressure requirements for different trims and engines of the 2010 Dodge Charger is essential for optimal vehicle performance. Below is a detailed table that outlines the recommended tire pressure settings in both PSI and BAR for various trims of the 2010 Dodge Charger.

2010 Dodge Charger Tire Pressure

Tire Pressure Table for Different Trim/Engine

Trim/Engine Front Tire Pressure (PSI) Front Tire Pressure (BAR) Rear Tire Pressure (PSI) Rear Tire Pressure (BAR)
SE 32 2.2 32 2.2
SXT 32 2.2 32 2.2
R/T 32 2.2 32 2.2
R/T AWD 32 2.2 32 2.2
Police 35 2.4 35 2.4
Super Bee 32 2.2 32 2.2

2010 Dodge Charger Tire Pressure Sensor Reset

The Tire Pressure Monitoring System (TPMS) in the 2010 Dodge Charger is designed to alert drivers when tire pressure is too low. If the TPMS light is flashing, it indicates a malfunction in the system or that the tire pressure is critically low. Resetting the tire pressure sensor is essential to ensure accurate readings and maintain vehicle safety.

Steps to Reset the Tire Pressure Sensor

Follow these steps to reset the tire pressure sensor in your 2010 Dodge Charger:


  1. Check the Tire Pressure: Use a tire pressure gauge to measure the pressure in all tires. Inflate or deflate them to the recommended PSI.

  2. Turn on the Ignition: Insert the key into the ignition and turn it to the “On” position without starting the engine.

  3. Locate the TPMS Reset Button: This button is usually found beneath the steering wheel or on the dashboard. Consult the owner’s manual for the exact location.

  4. Press and Hold the Reset Button: Hold the button until the TPMS light blinks three times, then release it.

  5. Start the Engine: Turn on the vehicle and let it run for a few minutes. The TPMS light should turn off if the reset is successful.

Tire Pressure Monitoring System Light Flashing

If the TPMS light continues to flash after resetting, it may indicate a deeper issue that needs attention. Here are common reasons for a flashing TPMS light:

Issue Description
Low Tire Pressure One or more tires may be under-inflated, triggering the alert.
Faulty Sensor A malfunctioning tire pressure sensor could cause the light to flash.
Battery Issues The battery in the tire pressure sensor may be dead or dying.
System Malfunction Other electronic issues within the vehicle may affect the TPMS.

What to Do if the Light Persists

If the TPMS light remains flashing despite following the reset procedure, consider the following actions:


  • Inspect all tires for visible damage or punctures.

  • Check the TPMS sensors for proper installation and functionality.

  • Consult a professional mechanic for a diagnostic check.

  • Visit a tire shop to have the tire pressure and sensors evaluated.

Importance of Maintaining Proper Tire Pressure

Maintaining the correct tire pressure is crucial for the overall performance and safety of your vehicle. Properly inflated tires ensure optimal contact with the road, which enhances handling, braking, and fuel efficiency. Under-inflated tires can lead to increased rolling resistance, resulting in poor fuel economy and faster tire wear. Conversely, over-inflated tires can reduce traction and increase the risk of blowouts.

Regularly checking and maintaining tire pressure can also contribute to a smoother ride. Here are some key reasons to prioritize tire pressure:

Benefits of Proper Tire Pressure


  • Improved Fuel Efficiency: Correct tire pressure can enhance gas mileage by reducing drag and improving engine performance.

  • Enhanced Safety: Properly inflated tires provide better traction and handling, reducing the risk of accidents.

  • Longer Tire Life: Maintaining the right pressure helps prevent uneven tire wear, extending the life of your tires.

  • Better Ride Comfort: Proper inflation contributes to a smoother and more comfortable driving experience.

How to Check Tire Pressure

Checking the tire pressure on your 2010 Dodge Charger is a straightforward process that can be done at home or at a gas station. Here’s how to do it:


  1. Gather Your Tools: You will need a reliable tire pressure gauge. Digital gauges tend to be more accurate than manual ones.

  2. Check the Recommended Pressure: Refer to the tire information sticker located on the driver’s side door jamb for the recommended PSI levels.

  3. Remove Valve Caps: Unscrew the valve caps from each tire, keeping them in a safe place.

  4. Press the Gauge: Firmly press the tire pressure gauge onto the valve stem. Ensure there is no hissing sound, which indicates air escaping.

  5. Read the Pressure: Check the reading on the gauge. Compare it with the recommended PSI.

  6. Adjust as Necessary: If the pressure is too low, inflate the tire to the recommended level. If it’s too high, release some air until it reaches the correct PSI.

  7. Replace Valve Caps: After checking and adjusting, screw the valve caps back on securely.

Useful Tips for Maintaining Tire Pressure

To ensure that your tire pressure remains optimal, consider the following tips:


  • Check Regularly: Inspect tire pressure at least once a month and before long trips.

  • Inspect Tires for Damage: Regularly check for cracks, bulges, or other signs of wear that may affect tire integrity.

  • Monitor Temperature Changes: Tire pressure can drop in colder temperatures. Check pressure more frequently during seasonal changes.

  • Use a Quality Gauge: Invest in a reliable tire pressure gauge for accurate readings.

  • Don’t Overlook the Spare Tire: Ensure that your spare tire is also properly inflated and ready for use.

By following these guidelines, you can maintain proper tire pressure, ensuring a safer and more efficient driving experience in your 2010 Dodge Charger.

Categories: Dodge

0 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *