The 2007 Ford Explorer is a versatile SUV that requires proper maintenance to ensure optimal performance and safety. One critical aspect of maintaining this vehicle is monitoring and adjusting the tire pressure. Proper tire pressure not only affects fuel efficiency but also impacts handling, tire wear, and overall driving safety.
Understanding the recommended tire pressure for different trims and engine configurations of the 2007 Ford Explorer is essential for owners. This information helps ensure that tires are inflated to the correct levels, promoting better performance and longevity. Below is a detailed table outlining the tire pressure specifications for various trims and engines of the 2007 Ford Explorer.
2007 Ford Explorer Tire Pressure
Tire Pressure Table for Different Trim/Engine
| Trim/Engine | Front Tire Pressure (PSI) | Front Tire Pressure (BAR) | Rear Tire Pressure (PSI) | Rear Tire Pressure (BAR) |
|---|---|---|---|---|
| XLS 4.0L V6 | 30 | 2.07 | 30 | 2.07 |
| XLT 4.0L V6 | 30 | 2.07 | 30 | 2.07 |
| Limited 4.6L V8 | 30 | 2.07 | 30 | 2.07 |
| Sport Trac 4.0L V6 | 30 | 2.07 | 30 | 2.07 |
| Sport Trac 4.6L V8 | 30 | 2.07 | 30 | 2.07 |
2007 Ford Explorer Tire Pressure Sensor Reset
The tire pressure monitoring system (TPMS) in the 2007 Ford Explorer is designed to alert drivers when tire pressure is too low. However, after adjusting tire pressures, the TPMS light may continue to flash until the system is reset. Knowing how to reset the tire pressure sensor is crucial for maintaining accurate tire pressure readings and ensuring a safe driving experience.
Steps to Reset the Tire Pressure Sensor
Resetting the tire pressure sensor can be done in a few simple steps. Follow these instructions to successfully reset the TPMS light:
- Check and adjust tire pressures: Ensure all tires are inflated to the recommended PSI as indicated in the tire pressure table.
- Turn the ignition to the “ON” position without starting the engine.
- Locate the TPMS reset button, usually found beneath the steering wheel or on the dashboard.
- Press and hold the TPMS reset button until the TPMS light blinks three times, then release the button.
- Start the vehicle and allow it to run for a few minutes. The TPMS light should turn off if the reset was successful.
Tire Pressure Monitoring System Light Flashing
If the TPMS light continues to flash after following the reset procedure, it may indicate a malfunction or issue with the system. Here are some common reasons for a flashing TPMS light:
| Issue | Description |
|---|---|
| Low Tire Pressure | One or more tires may still be under-inflated. |
| Faulty TPMS Sensor | A sensor may be damaged or malfunctioning. |
| Battery Issues | The battery in a tire pressure sensor may be dead. |
| System Malfunction | The TPMS may require professional diagnosis and repair. |
What to Do If the Light Remains On
If the TPMS light remains on after resetting, take the following actions:
- Recheck tire pressures to ensure they are at the correct levels.
- Inspect each tire for visible damage or leaks.
- Consult the owner’s manual for specific troubleshooting steps.
- Visit a certified mechanic or tire specialist for further diagnosis.
Importance of Maintaining Proper Tire Pressure
Maintaining proper tire pressure is crucial for the overall performance and safety of your vehicle. Under-inflated or over-inflated tires can lead to a range of issues, including decreased fuel efficiency, poor handling, and increased tire wear. Additionally, incorrect tire pressure can compromise safety by reducing traction and increasing the risk of blowouts.
Proper tire pressure also contributes to a smoother ride. When tires are inflated to the correct levels, they can absorb shocks from the road more effectively, providing better comfort for passengers. Moreover, maintaining the right pressure can extend the lifespan of your tires, saving you money on replacements in the long run.
How to Check Tire Pressure
Checking the tire pressure of your 2007 Ford Explorer is a straightforward process. Follow these steps to ensure your tires are properly inflated:
- Gather the necessary tools: You will need a reliable tire pressure gauge and an air compressor if adjustments are needed.
- Check tire pressure when tires are cold: For the most accurate reading, check tire pressure in the morning or after the vehicle has been parked for several hours.
- Remove the valve cap from one tire: Place it in a safe location to avoid losing it.
- Press the tire pressure gauge onto the valve stem: Ensure a tight seal to get an accurate reading.
- Read the gauge: Compare the reading to the recommended PSI found in your owner’s manual or on the driver’s side door jamb.
- Repeat for all tires: Don’t forget to check the spare tire as well, if applicable.
Useful Tips for Maintaining Tire Pressure
To keep your tires in optimal condition, consider the following tips:
- Regularly inspect tires: Check for signs of wear, damage, or uneven tread patterns.
- Monitor tire pressure monthly: Make it a habit to check tire pressure at least once a month and before long trips.
- Adjust for temperature changes: Tire pressure can drop in colder weather. Always check and adjust accordingly.
- Use a quality tire pressure gauge: Invest in a reliable gauge for accurate readings.
- Don’t forget the spare tire: Ensure the spare tire is also inflated to the recommended pressure.
- Consider professional inspections: Have your tires checked by a professional during regular maintenance to identify any underlying issues.
0 Comments